| // Copyright (c) 2012, the Dart project authors. Please see the AUTHORS file |
| // for details. All rights reserved. Use of this source code is governed by a |
| // BSD-style license that can be found in the LICENSE file. |
| |
| /** |
| * Concurrent programming using _isolates_: |
| * independent workers that are similar to threads |
| * but don't share memory, |
| * communicating only via messages. |
| * |
| * To use this library in your code: |
| * |
| * import 'dart:isolate'; |
| * |
| * {@category VM} |
| */ |
| library dart.isolate; |
| |
| import "dart:async"; |
| import "dart:_internal" show Since; |
| import "dart:typed_data" show ByteBuffer, TypedData, Uint8List; |
| |
| part "capability.dart"; |
| |
| /** |
| * Thrown when an isolate cannot be created. |
| */ |
| class IsolateSpawnException implements Exception { |
| /** Error message reported by the spawn operation. */ |
| final String message; |
| @pragma("vm:entry-point") |
| IsolateSpawnException(this.message); |
| String toString() => "IsolateSpawnException: $message"; |
| } |
| |
| /** |
| * An isolated Dart execution context. |
| * |
| * All Dart code runs in an isolate, and code can access classes and values |
| * only from the same isolate. Different isolates can communicate by sending |
| * values through ports (see [ReceivePort], [SendPort]). |
| * |
| * An `Isolate` object is a reference to an isolate, usually different from |
| * the current isolate. |
| * It represents, and can be used to control, the other isolate. |
| * |
| * When spawning a new isolate, the spawning isolate receives an `Isolate` |
| * object representing the new isolate when the spawn operation succeeds. |
| * |
| * Isolates run code in its own event loop, and each event may run smaller tasks |
| * in a nested microtask queue. |
| * |
| * An `Isolate` object allows other isolates to control the event loop |
| * of the isolate that it represents, and to inspect the isolate, |
| * for example by pausing the isolate or by getting events when the isolate |
| * has an uncaught error. |
| * |
| * The [controlPort] identifies and gives access to controlling the isolate, |
| * and the [pauseCapability] and [terminateCapability] guard access |
| * to some control operations. |
| * For example, calling [pause] on an `Isolate` object created without a |
| * [pauseCapability], has no effect. |
| * |
| * The `Isolate` object provided by a spawn operation will have the |
| * control port and capabilities needed to control the isolate. |
| * New isolate objects can be created without some of these capabilities |
| * if necessary, using the [Isolate.Isolate] constructor. |
| * |
| * An `Isolate` object cannot be sent over a `SendPort`, but the control port |
| * and capabilities can be sent, and can be used to create a new functioning |
| * `Isolate` object in the receiving port's isolate. |
| */ |
| class Isolate { |
| /** Argument to `ping` and `kill`: Ask for immediate action. */ |
| static const int immediate = 0; |
| /** Argument to `ping` and `kill`: Ask for action before the next event. */ |
| static const int beforeNextEvent = 1; |
| |
| /** |
| * Control port used to send control messages to the isolate. |
| * |
| * The control port identifies the isolate. |
| * |
| * An `Isolate` object allows sending control messages |
| * through the control port. |
| * |
| * Some control messages require a specific capability to be passed along |
| * with the message (see [pauseCapability] and [terminateCapability]), |
| * otherwise the message is ignored by the isolate. |
| */ |
| final SendPort controlPort; |
| |
| /** |
| * Capability granting the ability to pause the isolate. |
| * |
| * This capability is required by [pause]. |
| * If the capability is `null`, or if it is not the correct pause capability |
| * of the isolate identified by [controlPort], |
| * then calls to [pause] will have no effect. |
| * |
| * If the isolate is spawned in a paused state, use this capability as |
| * argument to the [resume] method in order to resume the paused isolate. |
| */ |
| final Capability pauseCapability; |
| |
| /** |
| * Capability granting the ability to terminate the isolate. |
| * |
| * This capability is required by [kill] and [setErrorsFatal]. |
| * If the capability is `null`, or if it is not the correct termination |
| * capability of the isolate identified by [controlPort], |
| * then calls to those methods will have no effect. |
| */ |
| final Capability terminateCapability; |
| |
| /** |
| * The name of the [Isolate] displayed for debug purposes. |
| * |
| * This can be set using the `debugName` parameter in [spawn] and [spawnUri]. |
| * |
| * This name does not uniquely identify an isolate. Multiple isolates in the |
| * same process may have the same `debugName`. |
| * |
| * For a given isolate, this value will be the same as the values returned by |
| * `Dart_DebugName` in the C embedding API and the `debugName` property in |
| * [IsolateMirror]. |
| */ |
| @Since("2.3") |
| external String get debugName; |
| |
| /** |
| * Create a new [Isolate] object with a restricted set of capabilities. |
| * |
| * The port should be a control port for an isolate, as taken from |
| * another `Isolate` object. |
| * |
| * The capabilities should be the subset of the capabilities that are |
| * available to the original isolate. |
| * Capabilities of an isolate are locked to that isolate, and have no effect |
| * anywhere else, so the capabilities should come from the same isolate as |
| * the control port. |
| * |
| * Can also be used to create an [Isolate] object from a control port, and |
| * any available capabilities, that have been sent through a [SendPort]. |
| * |
| * Example: |
| * ```dart |
| * Isolate isolate = findSomeIsolate(); |
| * Isolate restrictedIsolate = new Isolate(isolate.controlPort); |
| * untrustedCode(restrictedIsolate); |
| * ``` |
| * This example creates a new `Isolate` object that cannot be used to |
| * pause or terminate the isolate. All the untrusted code can do is to |
| * inspect the isolate and see uncaught errors or when it terminates. |
| */ |
| Isolate(this.controlPort, {this.pauseCapability, this.terminateCapability}); |
| |
| /** |
| * Return an [Isolate] object representing the current isolate. |
| * |
| * The current isolate for code using [current] |
| * is the isolate running the code. |
| * |
| * The isolate object provides the capabilities required to inspect, |
| * pause or kill the isolate, and allows granting these capabilities |
| * to others. |
| * |
| * It is possible to pause the current isolate, but doing so *without* |
| * first passing the ability to resume it again to another isolate, |
| * is a sure way to hang your program. |
| */ |
| external static Isolate get current; |
| |
| /** |
| * The location of the package configuration of the current isolate, if any. |
| * |
| * This getter returns `null`, as the `packages/` directory is not supported |
| * in Dart 2. |
| */ |
| @Deprecated('packages/ directory resolution is not supported in Dart 2.') |
| external static Future<Uri> get packageRoot; |
| |
| /** |
| * The package root of the current isolate, if any. |
| * |
| * If the isolate is using a [packageRoot] or the isolate has not been |
| * setup for package resolution, this getter returns `null`, otherwise it |
| * returns the package config URI. |
| */ |
| external static Future<Uri> get packageConfig; |
| |
| /** |
| * Maps a package: URI to a non-package Uri. |
| * |
| * If there is no valid mapping from the package: URI in the current |
| * isolate, then this call returns `null`. Non-package: URIs are |
| * returned unmodified. |
| */ |
| external static Future<Uri> resolvePackageUri(Uri packageUri); |
| |
| /** |
| * Creates and spawns an isolate that shares the same code as the current |
| * isolate. |
| * |
| * The argument [entryPoint] specifies the initial function to call |
| * in the spawned isolate. |
| * The entry-point function is invoked in the new isolate with [message] |
| * as the only argument. |
| * |
| * The function must be a top-level function or a static method |
| * that can be called with a single argument, |
| * that is, a compile-time constant function value |
| * which accepts at least one positional parameter |
| * and has at most one required positional parameter. |
| * The function may accept any number of optional parameters, |
| * as long as it *can* be called with just a single argument. |
| * The function must not be the value of a function expression |
| * or an instance method tear-off. |
| * |
| * Usually the initial [message] contains a [SendPort] so |
| * that the spawner and spawnee can communicate with each other. |
| * |
| * If the [paused] parameter is set to `true`, |
| * the isolate will start up in a paused state, |
| * just before calling the [entryPoint] function with the [message], |
| * as if by an initial call of `isolate.pause(isolate.pauseCapability)`. |
| * To resume the isolate, call `isolate.resume(isolate.pauseCapability)`. |
| * |
| * If the [errorsAreFatal], [onExit] and/or [onError] parameters are provided, |
| * the isolate will act as if, respectively, [setErrorsFatal], |
| * [addOnExitListener] and [addErrorListener] were called with the |
| * corresponding parameter and was processed before the isolate starts |
| * running. |
| * |
| * If [debugName] is provided, the spawned [Isolate] will be identifiable by |
| * this name in debuggers and logging. |
| * |
| * If [errorsAreFatal] is omitted, the platform may choose a default behavior |
| * or inherit the current isolate's behavior. |
| * |
| * You can also call the [setErrorsFatal], [addOnExitListener] and |
| * [addErrorListener] methods on the returned isolate, but unless the |
| * isolate was started as [paused], it may already have terminated |
| * before those methods can complete. |
| * |
| * Returns a future which will complete with an [Isolate] instance if the |
| * spawning succeeded. It will complete with an error otherwise. |
| */ |
| external static Future<Isolate> spawn<T>( |
| void entryPoint(T message), T message, |
| {bool paused: false, |
| bool errorsAreFatal, |
| SendPort onExit, |
| SendPort onError, |
| @Since("2.3") String debugName}); |
| |
| /** |
| * Creates and spawns an isolate that runs the code from the library with |
| * the specified URI. |
| * |
| * The isolate starts executing the top-level `main` function of the library |
| * with the given URI. |
| * |
| * The target `main` must be callable with zero, one or two arguments. |
| * Examples: |
| * |
| * * `main()` |
| * * `main(args)` |
| * * `main(args, message)` |
| * |
| * When present, the parameter `args` is set to the provided [args] list. |
| * When present, the parameter `message` is set to the initial [message]. |
| * |
| * If the [paused] parameter is set to `true`, |
| * the isolate will start up in a paused state, |
| * as if by an initial call of `isolate.pause(isolate.pauseCapability)`. |
| * To resume the isolate, call `isolate.resume(isolate.pauseCapability)`. |
| * |
| * If the [errorsAreFatal], [onExit] and/or [onError] parameters are provided, |
| * the isolate will act as if, respectively, [setErrorsFatal], |
| * [addOnExitListener] and [addErrorListener] were called with the |
| * corresponding parameter and was processed before the isolate starts |
| * running. |
| * |
| * You can also call the [setErrorsFatal], [addOnExitListener] and |
| * [addErrorListener] methods on the returned isolate, but unless the |
| * isolate was started as [paused], it may already have terminated |
| * before those methods can complete. |
| * |
| * If the [checked] parameter is set to `true` or `false`, |
| * the new isolate will run code in checked mode (enabling asserts and type |
| * checks), respectively in production mode (disabling asserts and type |
| * checks), if possible. If the parameter is omitted, the new isolate will |
| * inherit the value from the current isolate. |
| * |
| * In Dart2 strong mode, the `checked` parameter only controls asserts, but |
| * not type checks. |
| * |
| * It may not always be possible to honor the `checked` parameter. |
| * If the isolate code was pre-compiled, it may not be possible to change |
| * the checked mode setting dynamically. |
| * In that case, the `checked` parameter is ignored. |
| * |
| * WARNING: The [checked] parameter is not implemented on all platforms yet. |
| * |
| * If the [packageConfig] parameter is provided, then it is used to find the |
| * location of a package resolution configuration file for the spawned |
| * isolate. |
| * |
| * If the [automaticPackageResolution] parameter is provided, then the |
| * location of the package sources in the spawned isolate is automatically |
| * determined. |
| * |
| * The [environment] is a mapping from strings to strings which the |
| * spawned isolate uses when looking up [String.fromEnvironment] values. |
| * The system may add its own entries to environment as well. |
| * If `environment` is omitted, the spawned isolate has the same environment |
| * declarations as the spawning isolate. |
| * |
| * WARNING: The [environment] parameter is not implemented on all |
| * platforms yet. |
| * |
| * If [debugName] is provided, the spawned [Isolate] will be identifiable by |
| * this name in debuggers and logging. |
| * |
| * Returns a future that will complete with an [Isolate] instance if the |
| * spawning succeeded. It will complete with an error otherwise. |
| */ |
| external static Future<Isolate> spawnUri( |
| Uri uri, |
| List<String> args, |
| var message, |
| {bool paused: false, |
| SendPort onExit, |
| SendPort onError, |
| bool errorsAreFatal, |
| bool checked, |
| Map<String, String> environment, |
| @Deprecated('The packages/ dir is not supported in Dart 2') |
| Uri packageRoot, |
| Uri packageConfig, |
| bool automaticPackageResolution: false, |
| @Since("2.3") |
| String debugName}); |
| |
| /** |
| * Requests the isolate to pause. |
| * |
| * When the isolate receives the pause command, it stops |
| * processing events from the event loop queue. |
| * It may still add new events to the queue in response to, e.g., timers |
| * or receive-port messages. When the isolate is resumed, |
| * it starts handling the already enqueued events. |
| * |
| * The pause request is sent through the isolate's command port, |
| * which bypasses the receiving isolate's event loop. |
| * The pause takes effect when it is received, pausing the event loop |
| * as it is at that time. |
| * |
| * The [resumeCapability] is used to identity the pause, |
| * and must be used again to end the pause using [resume]. |
| * If [resumeCapability] is omitted, a new capability object is created |
| * and used instead. |
| * |
| * If an isolate is paused more than once using the same capability, |
| * only one resume with that capability is needed to end the pause. |
| * |
| * If an isolate is paused using more than one capability, |
| * each pause must be individually ended before the isolate resumes. |
| * |
| * Returns the capability that must be used to end the pause. |
| * This is either [resumeCapability], or a new capability when |
| * [resumeCapability] is omitted. |
| * |
| * If [pauseCapability] is `null`, or it's not the pause capability |
| * of the isolate identified by [controlPort], |
| * the pause request is ignored by the receiving isolate. |
| */ |
| Capability pause([Capability resumeCapability]) { |
| resumeCapability ??= new Capability(); |
| _pause(resumeCapability); |
| return resumeCapability; |
| } |
| |
| /** Internal implementation of [pause]. */ |
| external void _pause(Capability resumeCapability); |
| |
| /** |
| * Resumes a paused isolate. |
| * |
| * Sends a message to an isolate requesting that it ends a pause |
| * that was previously requested. |
| * |
| * When all active pause requests have been cancelled, the isolate |
| * will continue processing events and handling normal messages. |
| * |
| * If the [resumeCapability] is not one that has previously been used |
| * to pause the isolate, or it has already been used to resume from |
| * that pause, the resume call has no effect. |
| */ |
| external void resume(Capability resumeCapability); |
| |
| /** |
| * Requests an exit message on [responsePort] when the isolate terminates. |
| * |
| * The isolate will send [response] as a message on [responsePort] as the last |
| * thing before it terminates. It will run no further code after the message |
| * has been sent. |
| * |
| * Adding the same port more than once will only cause it to receive one exit |
| * message, using the last response value that was added, |
| * and it only needs to be removed once using [removeOnExitListener]. |
| * |
| * If the isolate has terminated before it can receive this request, |
| * no exit message will be sent. |
| * |
| * The [response] object must follow the same restrictions as enforced by |
| * [SendPort.send]. |
| * It is recommended to only use simple values that can be sent to all |
| * isolates, like `null`, booleans, numbers or strings. |
| * |
| * Since isolates run concurrently, it's possible for it to exit before the |
| * exit listener is established, and in that case no response will be |
| * sent on [responsePort]. |
| * To avoid this, either use the corresponding parameter to the spawn |
| * function, or start the isolate paused, add the listener and |
| * then resume the isolate. |
| */ |
| /* TODO(lrn): Can we do better? Can the system recognize this message and |
| * send a reply if the receiving isolate is dead? |
| */ |
| external void addOnExitListener(SendPort responsePort, {Object response}); |
| |
| /** |
| * Stops listening for exit messages from the isolate. |
| * |
| * Requests for the isolate to not send exit messages on [responsePort]. |
| * If the isolate isn't expecting to send exit messages on [responsePort], |
| * because the port hasn't been added using [addOnExitListener], |
| * or because it has already been removed, the request is ignored. |
| * |
| * If the same port has been passed via [addOnExitListener] more than once, |
| * only one call to `removeOnExitListener` is needed to stop it from receiving |
| * exit messages. |
| * |
| * Closing the receive port that is associated with the [responsePort] does |
| * not stop the isolate from sending uncaught errors, they are just going to |
| * be lost. |
| * |
| * An exit message may still be sent if the isolate terminates |
| * before this request is received and processed. |
| */ |
| external void removeOnExitListener(SendPort responsePort); |
| |
| /** |
| * Sets whether uncaught errors will terminate the isolate. |
| * |
| * If errors are fatal, any uncaught error will terminate the isolate |
| * event loop and shut down the isolate. |
| * |
| * This call requires the [terminateCapability] for the isolate. |
| * If the capability is absent or incorrect, no change is made. |
| * |
| * Since isolates run concurrently, it's possible for the receiving isolate |
| * to exit due to an error, before a request, using this method, has been |
| * received and processed. |
| * To avoid this, either use the corresponding parameter to the spawn |
| * function, or start the isolate paused, set errors non-fatal and |
| * then resume the isolate. |
| */ |
| external void setErrorsFatal(bool errorsAreFatal); |
| |
| /** |
| * Requests the isolate to shut down. |
| * |
| * The isolate is requested to terminate itself. |
| * The [priority] argument specifies when this must happen. |
| * |
| * The [priority], when provided, must be one of [immediate] or |
| * [beforeNextEvent] (the default). |
| * The shutdown is performed at different times depending on the priority: |
| * |
| * * `immediate`: The isolate shuts down as soon as possible. |
| * Control messages are handled in order, so all previously sent control |
| * events from this isolate will all have been processed. |
| * The shutdown should happen no later than if sent with |
| * `beforeNextEvent`. |
| * It may happen earlier if the system has a way to shut down cleanly |
| * at an earlier time, even during the execution of another event. |
| * * `beforeNextEvent`: The shutdown is scheduled for the next time |
| * control returns to the event loop of the receiving isolate, |
| * after the current event, and any already scheduled control events, |
| * are completed. |
| * |
| * If [terminateCapability] is `null`, or it's not the terminate capability |
| * of the isolate identified by [controlPort], |
| * the kill request is ignored by the receiving isolate. |
| */ |
| external void kill({int priority: beforeNextEvent}); |
| |
| /** |
| * Requests that the isolate send [response] on the [responsePort]. |
| * |
| * The [response] object must follow the same restrictions as enforced by |
| * [SendPort.send]. |
| * It is recommended to only use simple values that can be sent to all |
| * isolates, like `null`, booleans, numbers or strings. |
| * |
| * If the isolate is alive, it will eventually send `response` |
| * (defaulting to `null`) on the response port. |
| * |
| * The [priority] must be one of [immediate] or [beforeNextEvent]. |
| * The response is sent at different times depending on the ping type: |
| * |
| * * `immediate`: The isolate responds as soon as it receives the |
| * control message. This is after any previous control message |
| * from the same isolate has been received and processed, |
| * but may be during execution of another event. |
| * * `beforeNextEvent`: The response is scheduled for the next time |
| * control returns to the event loop of the receiving isolate, |
| * after the current event, and any already scheduled control events, |
| * are completed. |
| */ |
| external void ping(SendPort responsePort, |
| {Object response, int priority: immediate}); |
| |
| /** |
| * Requests that uncaught errors of the isolate are sent back to [port]. |
| * |
| * The errors are sent back as two elements lists. |
| * The first element is a `String` representation of the error, usually |
| * created by calling `toString` on the error. |
| * The second element is a `String` representation of an accompanying |
| * stack trace, or `null` if no stack trace was provided. |
| * To convert this back to a [StackTrace] object, use [StackTrace.fromString]. |
| * |
| * Listening using the same port more than once does nothing. |
| * A port will only receive each error once, |
| * and will only need to be removed once using [removeErrorListener]. |
| |
| * Closing the receive port that is associated with the port does not stop |
| * the isolate from sending uncaught errors, they are just going to be lost. |
| * Instead use [removeErrorListener] to stop receiving errors on [port]. |
| * |
| * Since isolates run concurrently, it's possible for it to exit before the |
| * error listener is established. To avoid this, start the isolate paused, |
| * add the listener and then resume the isolate. |
| */ |
| external void addErrorListener(SendPort port); |
| |
| /** |
| * Stops listening for uncaught errors from the isolate. |
| * |
| * Requests for the isolate to not send uncaught errors on [port]. |
| * If the isolate isn't expecting to send uncaught errors on [port], |
| * because the port hasn't been added using [addErrorListener], |
| * or because it has already been removed, the request is ignored. |
| * |
| * If the same port has been passed via [addErrorListener] more than once, |
| * only one call to `removeErrorListener` is needed to stop it from receiving |
| * uncaught errors. |
| * |
| * Uncaught errors message may still be sent by the isolate |
| * until this request is received and processed. |
| */ |
| external void removeErrorListener(SendPort port); |
| |
| /** |
| * Returns a broadcast stream of uncaught errors from the isolate. |
| * |
| * Each error is provided as an error event on the stream. |
| * |
| * The actual error object and stackTraces will not necessarily |
| * be the same object types as in the actual isolate, but they will |
| * always have the same [Object.toString] result. |
| * |
| * This stream is based on [addErrorListener] and [removeErrorListener]. |
| */ |
| Stream get errors { |
| StreamController controller; |
| RawReceivePort port; |
| void handleError(message) { |
| List listMessage = message; |
| String errorDescription = listMessage[0]; |
| String stackDescription = listMessage[1]; |
| var error = new RemoteError(errorDescription, stackDescription); |
| controller.addError(error, error.stackTrace); |
| } |
| |
| controller = new StreamController.broadcast( |
| sync: true, |
| onListen: () { |
| port = new RawReceivePort(handleError); |
| this.addErrorListener(port.sendPort); |
| }, |
| onCancel: () { |
| this.removeErrorListener(port.sendPort); |
| port.close(); |
| port = null; |
| }); |
| return controller.stream; |
| } |
| } |
| |
| /** |
| * Sends messages to its [ReceivePort]s. |
| * |
| * [SendPort]s are created from [ReceivePort]s. Any message sent through |
| * a [SendPort] is delivered to its corresponding [ReceivePort]. There might be |
| * many [SendPort]s for the same [ReceivePort]. |
| * |
| * [SendPort]s can be transmitted to other isolates, and they preserve equality |
| * when sent. |
| */ |
| abstract class SendPort implements Capability { |
| /** |
| * Sends an asynchronous [message] through this send port, to its |
| * corresponding `ReceivePort`. |
| * |
| * The content of [message] can be: primitive values (null, num, bool, double, |
| * String), instances of [SendPort], and lists and maps whose elements are any |
| * of these. List and maps are also allowed to be cyclic. |
| * |
| * In the special circumstances when two isolates share the same code and are |
| * running in the same process (e.g. isolates created via [Isolate.spawn]), it |
| * is also possible to send object instances (which would be copied in the |
| * process). This is currently only supported by the dartvm. For now, the |
| * dart2js compiler only supports the restricted messages described above. |
| * |
| * The send happens immediately and doesn't block. The corresponding receive |
| * port can receive the message as soon as its isolate's event loop is ready |
| * to deliver it, independently of what the sending isolate is doing. |
| */ |
| void send(var message); |
| |
| /** |
| * Tests whether [other] is a [SendPort] pointing to the same |
| * [ReceivePort] as this one. |
| */ |
| bool operator ==(var other); |
| |
| /** |
| * Returns an immutable hash code for this send port that is |
| * consistent with the == operator. |
| */ |
| int get hashCode; |
| } |
| |
| /** |
| * Together with [SendPort], the only means of communication between isolates. |
| * |
| * [ReceivePort]s have a `sendPort` getter which returns a [SendPort]. |
| * Any message that is sent through this [SendPort] |
| * is delivered to the [ReceivePort] it has been created from. There, the |
| * message is dispatched to the `ReceivePort`'s listener. |
| * |
| * A [ReceivePort] is a non-broadcast stream. This means that it buffers |
| * incoming messages until a listener is registered. Only one listener can |
| * receive messages. See [Stream.asBroadcastStream] for transforming the port |
| * to a broadcast stream. |
| * |
| * A [ReceivePort] may have many [SendPort]s. |
| */ |
| abstract class ReceivePort implements Stream { |
| /** |
| * Opens a long-lived port for receiving messages. |
| * |
| * A [ReceivePort] is a non-broadcast stream. This means that it buffers |
| * incoming messages until a listener is registered. Only one listener can |
| * receive messages. See [Stream.asBroadcastStream] for transforming the port |
| * to a broadcast stream. |
| * |
| * A receive port is closed by canceling its subscription. |
| */ |
| external factory ReceivePort(); |
| |
| /** |
| * Creates a [ReceivePort] from a [RawReceivePort]. |
| * |
| * The handler of the given [rawPort] is overwritten during the construction |
| * of the result. |
| */ |
| external factory ReceivePort.fromRawReceivePort(RawReceivePort rawPort); |
| |
| /** |
| * Inherited from [Stream]. |
| * |
| * Note that [onError] and [cancelOnError] are ignored since a ReceivePort |
| * will never receive an error. |
| * |
| * The [onDone] handler will be called when the stream closes. |
| * The stream closes when [close] is called. |
| */ |
| StreamSubscription listen(void onData(var message), |
| {Function onError, void onDone(), bool cancelOnError}); |
| |
| /** |
| * Closes `this`. |
| * |
| * If the stream has not been canceled yet, adds a close-event to the event |
| * queue and discards any further incoming messages. |
| * |
| * If the stream has already been canceled this method has no effect. |
| */ |
| void close(); |
| |
| /** |
| * Returns a [SendPort] that sends to this receive port. |
| */ |
| SendPort get sendPort; |
| } |
| |
| abstract class RawReceivePort { |
| /** |
| * Opens a long-lived port for receiving messages. |
| * |
| * A [RawReceivePort] is low level and does not work with [Zone]s. It |
| * can not be paused. The data-handler must be set before the first |
| * event is received. |
| */ |
| external factory RawReceivePort([Function handler]); |
| |
| /** |
| * Sets the handler that is invoked for every incoming message. |
| * |
| * The handler is invoked in the root-zone ([Zone.root]). |
| */ |
| void set handler(Function newHandler); |
| |
| /** |
| * Closes the port. |
| * |
| * After a call to this method any incoming message is silently dropped. |
| */ |
| void close(); |
| |
| /** |
| * Returns a [SendPort] that sends to this raw receive port. |
| */ |
| SendPort get sendPort; |
| } |
| |
| /** |
| * Description of an error from another isolate. |
| * |
| * This error has the same `toString()` and `stackTrace.toString()` behavior |
| * as the original error, but has no other features of the original error. |
| */ |
| class RemoteError implements Error { |
| final String _description; |
| final StackTrace stackTrace; |
| RemoteError(String description, String stackDescription) |
| : _description = description, |
| stackTrace = new StackTrace.fromString(stackDescription); |
| String toString() => _description; |
| } |
| |
| /* |
| * An efficiently transferable sequence of byte values. |
| * |
| * A [TransferableTypedData] is created from a number of bytes. |
| * This will take time proportional to the number of bytes. |
| * |
| * The [TransferableTypedData] can be moved between isolates, so |
| * sending it through a send port will only take constant time. |
| * |
| * When sent this way, the local transferable can no longer be materialized, |
| * and the received object is now the only way to materialize the data. |
| */ |
| @Since("2.3.2") |
| abstract class TransferableTypedData { |
| /** |
| * Creates a new [TransferableTypedData] containing the bytes of [list]. |
| * |
| * It must be possible to create a single [Uint8List] containing the |
| * bytes, so if there are more bytes than what the platform allows in |
| * a single [Uint8List], then creation fails. |
| */ |
| external factory TransferableTypedData.fromList(List<TypedData> list); |
| |
| /** |
| * Creates a new [ByteBuffer] containing the bytes stored in this [TransferableTypedData]. |
| * |
| * The [TransferableTypedData] is a cross-isolate single-use resource. |
| * This method must not be called more than once on the same underlying |
| * transferable bytes, even if the calls occur in different isolates. |
| */ |
| ByteBuffer materialize(); |
| } |