| /* |
| * Copyright (C) 2011 Google Inc. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following disclaimer |
| * in the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name of Google Inc. nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "sky/engine/core/rendering/RenderFlexibleBox.h" |
| |
| #include <limits> |
| #include "sky/engine/core/rendering/RenderLayer.h" |
| #include "sky/engine/core/rendering/RenderView.h" |
| #include "sky/engine/platform/LengthFunctions.h" |
| #include "sky/engine/wtf/MathExtras.h" |
| |
| namespace blink { |
| |
| struct RenderFlexibleBox::LineContext { |
| LineContext(LayoutUnit crossAxisOffset, LayoutUnit crossAxisExtent, size_t numberOfChildren, LayoutUnit maxAscent) |
| : crossAxisOffset(crossAxisOffset) |
| , crossAxisExtent(crossAxisExtent) |
| , numberOfChildren(numberOfChildren) |
| , maxAscent(maxAscent) |
| { |
| } |
| |
| LayoutUnit crossAxisOffset; |
| LayoutUnit crossAxisExtent; |
| size_t numberOfChildren; |
| LayoutUnit maxAscent; |
| }; |
| |
| struct RenderFlexibleBox::Violation { |
| Violation(RenderBox* child, LayoutUnit childSize) |
| : child(child) |
| , childSize(childSize) |
| { |
| } |
| |
| RenderBox* child; |
| LayoutUnit childSize; |
| }; |
| |
| |
| RenderFlexibleBox::RenderFlexibleBox(ContainerNode* node) |
| : RenderBlock(node) |
| , m_orderIterator(this) |
| , m_numberOfInFlowChildrenOnFirstLine(-1) |
| { |
| } |
| |
| RenderFlexibleBox::~RenderFlexibleBox() |
| { |
| } |
| |
| const char* RenderFlexibleBox::renderName() const |
| { |
| return "RenderFlexibleBox"; |
| } |
| |
| void RenderFlexibleBox::computeIntrinsicLogicalWidths(LayoutUnit& minLogicalWidth, LayoutUnit& maxLogicalWidth) const |
| { |
| // FIXME: We're ignoring flex-basis here and we shouldn't. We can't start honoring it though until |
| // the flex shorthand stops setting it to 0. |
| // See https://bugs.webkit.org/show_bug.cgi?id=116117 and http://crbug.com/240765. |
| for (RenderBox* child = firstChildBox(); child; child = child->nextSiblingBox()) { |
| if (child->isOutOfFlowPositioned()) |
| continue; |
| |
| LayoutUnit margin = marginIntrinsicLogicalWidthForChild(child); |
| LayoutUnit minPreferredLogicalWidth = child->minPreferredLogicalWidth(); |
| LayoutUnit maxPreferredLogicalWidth = child->maxPreferredLogicalWidth(); |
| minPreferredLogicalWidth += margin; |
| maxPreferredLogicalWidth += margin; |
| if (!isColumnFlow()) { |
| maxLogicalWidth += maxPreferredLogicalWidth; |
| if (isMultiline()) { |
| // For multiline, the min preferred width is if you put a break between each item. |
| minLogicalWidth = std::max(minLogicalWidth, minPreferredLogicalWidth); |
| } else |
| minLogicalWidth += minPreferredLogicalWidth; |
| } else { |
| minLogicalWidth = std::max(minPreferredLogicalWidth, minLogicalWidth); |
| maxLogicalWidth = std::max(maxPreferredLogicalWidth, maxLogicalWidth); |
| } |
| } |
| |
| maxLogicalWidth = std::max(minLogicalWidth, maxLogicalWidth); |
| } |
| |
| static int synthesizedBaselineFromContentBox(const RenderBox* box, LineDirectionMode direction) |
| { |
| return direction == HorizontalLine ? box->borderTop() + box->paddingTop() + box->contentHeight() : box->borderRight() + box->paddingRight() + box->contentWidth(); |
| } |
| |
| int RenderFlexibleBox::baselinePosition(FontBaseline, bool, LineDirectionMode direction, LinePositionMode mode) const |
| { |
| ASSERT(mode == PositionOnContainingLine); |
| int baseline = firstLineBoxBaseline(FontBaselineOrAuto()); |
| if (baseline == -1) |
| baseline = synthesizedBaselineFromContentBox(this, direction); |
| |
| return beforeMarginInLineDirection(direction) + baseline; |
| } |
| |
| int RenderFlexibleBox::firstLineBoxBaseline(FontBaselineOrAuto baselineType) const |
| { |
| if (m_numberOfInFlowChildrenOnFirstLine <= 0) |
| return -1; |
| RenderBox* baselineChild = 0; |
| int childNumber = 0; |
| for (RenderBox* child = m_orderIterator.first(); child; child = m_orderIterator.next()) { |
| if (child->isOutOfFlowPositioned()) |
| continue; |
| if (alignmentForChild(child) == ItemPositionBaseline && !hasAutoMarginsInCrossAxis(child)) { |
| baselineChild = child; |
| break; |
| } |
| if (!baselineChild) |
| baselineChild = child; |
| |
| ++childNumber; |
| if (childNumber == m_numberOfInFlowChildrenOnFirstLine) |
| break; |
| } |
| |
| if (!baselineChild) |
| return -1; |
| |
| if (!isColumnFlow() && hasOrthogonalFlow(baselineChild)) |
| return crossAxisExtentForChild(baselineChild) + baselineChild->logicalTop(); |
| if (isColumnFlow() && !hasOrthogonalFlow(baselineChild)) |
| return mainAxisExtentForChild(baselineChild) + baselineChild->logicalTop(); |
| |
| int baseline = baselineChild->firstLineBoxBaseline(baselineType); |
| if (baseline == -1) { |
| // FIXME: We should pass |direction| into firstLineBoxBaseline and stop bailing out if we're a writing mode root. |
| // This would also fix some cases where the flexbox is orthogonal to its container. |
| LineDirectionMode direction = HorizontalLine; |
| return synthesizedBaselineFromContentBox(baselineChild, direction) + baselineChild->logicalTop(); |
| } |
| |
| return baseline + baselineChild->logicalTop(); |
| } |
| |
| int RenderFlexibleBox::inlineBlockBaseline(LineDirectionMode direction) const |
| { |
| int baseline = firstLineBoxBaseline(FontBaselineOrAuto()); |
| if (baseline != -1) |
| return baseline; |
| |
| int marginAscent = direction == HorizontalLine ? marginTop() : marginRight(); |
| return synthesizedBaselineFromContentBox(this, direction) + marginAscent; |
| } |
| |
| static ItemPosition resolveAlignment(const RenderStyle* parentStyle, const RenderStyle* childStyle) |
| { |
| ItemPosition align = childStyle->alignSelf(); |
| if (align == ItemPositionAuto) |
| align = (parentStyle->alignItems() == ItemPositionAuto) ? ItemPositionStretch : parentStyle->alignItems(); |
| return align; |
| } |
| |
| void RenderFlexibleBox::removeChild(RenderObject* child) |
| { |
| RenderBlock::removeChild(child); |
| m_intrinsicSizeAlongMainAxis.remove(child); |
| } |
| |
| void RenderFlexibleBox::styleDidChange(StyleDifference diff, const RenderStyle* oldStyle) |
| { |
| RenderBlock::styleDidChange(diff, oldStyle); |
| |
| if (oldStyle && oldStyle->alignItems() == ItemPositionStretch && diff.needsFullLayout()) { |
| // Flex items that were previously stretching need to be relayed out so we can compute new available cross axis space. |
| // This is only necessary for stretching since other alignment values don't change the size of the box. |
| for (RenderBox* child = firstChildBox(); child; child = child->nextSiblingBox()) { |
| ItemPosition previousAlignment = resolveAlignment(oldStyle, child->style()); |
| if (previousAlignment == ItemPositionStretch && previousAlignment != resolveAlignment(style(), child->style())) |
| child->setChildNeedsLayout(MarkOnlyThis); |
| } |
| } |
| } |
| |
| void RenderFlexibleBox::layout() |
| { |
| ASSERT(needsLayout()); |
| |
| if (simplifiedLayout()) |
| return; |
| |
| bool relayoutChildren = updateLogicalWidthAndColumnWidth(); |
| LayoutUnit previousHeight = logicalHeight(); |
| setLogicalHeight(borderAndPaddingLogicalHeight()); |
| |
| m_numberOfInFlowChildrenOnFirstLine = -1; |
| |
| prepareOrderIteratorAndMargins(); |
| |
| ChildFrameRects oldChildRects; |
| appendChildFrameRects(oldChildRects); |
| |
| layoutFlexItems(relayoutChildren); |
| |
| if (logicalHeight() != previousHeight) |
| relayoutChildren = true; |
| |
| layoutPositionedObjects(relayoutChildren); |
| |
| // FIXME: css3/flexbox/repaint-rtl-column.html seems to issue paint invalidations for more overflow than it needs to. |
| computeOverflow(clientLogicalBottomAfterRepositioning()); |
| |
| updateLayerTransformAfterLayout(); |
| |
| clearNeedsLayout(); |
| } |
| |
| void RenderFlexibleBox::appendChildFrameRects(ChildFrameRects& childFrameRects) |
| { |
| for (RenderBox* child = m_orderIterator.first(); child; child = m_orderIterator.next()) { |
| if (!child->isOutOfFlowPositioned()) |
| childFrameRects.append(child->frameRect()); |
| } |
| } |
| |
| void RenderFlexibleBox::paintChildren(PaintInfo& paintInfo, const LayoutPoint& paintOffset, Vector<RenderBox*>& layers) |
| { |
| for (RenderBox* child = m_orderIterator.first(); child; child = m_orderIterator.next()) { |
| if (child->hasSelfPaintingLayer()) |
| layers.append(child); |
| else |
| child->paint(paintInfo, paintOffset, layers); |
| } |
| } |
| |
| void RenderFlexibleBox::repositionLogicalHeightDependentFlexItems(Vector<LineContext>& lineContexts) |
| { |
| LayoutUnit crossAxisStartEdge = lineContexts.isEmpty() ? LayoutUnit() : lineContexts[0].crossAxisOffset; |
| alignFlexLines(lineContexts); |
| |
| alignChildren(lineContexts); |
| |
| if (style()->flexWrap() == FlexWrapReverse) |
| flipForWrapReverse(lineContexts, crossAxisStartEdge); |
| |
| // direction:rtl + flex-direction:column means the cross-axis direction is flipped. |
| flipForRightToLeftColumn(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::clientLogicalBottomAfterRepositioning() |
| { |
| LayoutUnit maxChildLogicalBottom = 0; |
| for (RenderBox* child = firstChildBox(); child; child = child->nextSiblingBox()) { |
| if (child->isOutOfFlowPositioned()) |
| continue; |
| LayoutUnit childLogicalBottom = logicalTopForChild(child) + logicalHeightForChild(child) + marginAfterForChild(child); |
| maxChildLogicalBottom = std::max(maxChildLogicalBottom, childLogicalBottom); |
| } |
| return std::max(clientLogicalBottom(), maxChildLogicalBottom + paddingAfter()); |
| } |
| |
| bool RenderFlexibleBox::hasOrthogonalFlow(RenderBox* child) const |
| { |
| // FIXME: If the child is a flexbox, then we need to check isHorizontalFlow. |
| return !isHorizontalFlow(); |
| } |
| |
| bool RenderFlexibleBox::isColumnFlow() const |
| { |
| return style()->isColumnFlexDirection(); |
| } |
| |
| bool RenderFlexibleBox::isHorizontalFlow() const |
| { |
| return !isColumnFlow(); |
| } |
| |
| bool RenderFlexibleBox::isLeftToRightFlow() const |
| { |
| if (isColumnFlow()) |
| return true; |
| return style()->isLeftToRightDirection() ^ (style()->flexDirection() == FlowRowReverse); |
| } |
| |
| bool RenderFlexibleBox::isMultiline() const |
| { |
| return style()->flexWrap() != FlexNoWrap; |
| } |
| |
| Length RenderFlexibleBox::flexBasisForChild(RenderBox* child) const |
| { |
| Length flexLength = child->style()->flexBasis(); |
| if (flexLength.isAuto()) |
| flexLength = isHorizontalFlow() ? child->style()->width() : child->style()->height(); |
| return flexLength; |
| } |
| |
| LayoutUnit RenderFlexibleBox::crossAxisExtentForChild(RenderBox* child) const |
| { |
| return isHorizontalFlow() ? child->height() : child->width(); |
| } |
| |
| static inline LayoutUnit constrainedChildIntrinsicContentLogicalHeight(RenderBox* child) |
| { |
| LayoutUnit childIntrinsicContentLogicalHeight = child->intrinsicContentLogicalHeight(); |
| return child->constrainLogicalHeightByMinMax(childIntrinsicContentLogicalHeight + child->borderAndPaddingLogicalHeight(), childIntrinsicContentLogicalHeight); |
| } |
| |
| LayoutUnit RenderFlexibleBox::childIntrinsicHeight(RenderBox* child) const |
| { |
| if (needToStretchChildLogicalHeight(child)) |
| return constrainedChildIntrinsicContentLogicalHeight(child); |
| return child->height(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::childIntrinsicWidth(RenderBox* child) const |
| { |
| // FIXME(sky): Remove |
| return child->width(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::crossAxisIntrinsicExtentForChild(RenderBox* child) const |
| { |
| return isHorizontalFlow() ? childIntrinsicHeight(child) : childIntrinsicWidth(child); |
| } |
| |
| LayoutUnit RenderFlexibleBox::mainAxisExtentForChild(RenderBox* child) const |
| { |
| return isHorizontalFlow() ? child->width() : child->height(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::crossAxisExtent() const |
| { |
| return isHorizontalFlow() ? height() : width(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::mainAxisExtent() const |
| { |
| return isHorizontalFlow() ? width() : height(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::crossAxisContentExtent() const |
| { |
| return isHorizontalFlow() ? contentHeight() : contentWidth(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::mainAxisContentExtent(LayoutUnit contentLogicalHeight) |
| { |
| if (isColumnFlow()) { |
| LogicalExtentComputedValues computedValues; |
| LayoutUnit borderPaddingAndScrollbar = borderAndPaddingLogicalHeight(); |
| LayoutUnit borderBoxLogicalHeight = contentLogicalHeight + borderPaddingAndScrollbar; |
| computeLogicalHeight(borderBoxLogicalHeight, logicalTop(), computedValues); |
| if (computedValues.m_extent == LayoutUnit::max()) |
| return computedValues.m_extent; |
| return std::max(LayoutUnit(0), computedValues.m_extent - borderPaddingAndScrollbar); |
| } |
| return contentLogicalWidth(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::computeMainAxisExtentForChild(RenderBox* child, SizeType sizeType, const Length& size) |
| { |
| // FIXME: This is wrong for orthogonal flows. It should use the flexbox's writing-mode, not the child's in order |
| // to figure out the logical height/width. |
| if (isColumnFlow()) { |
| // We don't have to check for "auto" here - computeContentLogicalHeight will just return -1 for that case anyway. |
| if (size.isIntrinsic()) |
| child->layoutIfNeeded(); |
| return child->computeContentLogicalHeight(size, child->logicalHeight() - child->borderAndPaddingLogicalHeight()); |
| } |
| return child->computeLogicalWidthUsing(sizeType, size, contentLogicalWidth(), this) - child->borderAndPaddingLogicalWidth(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::flowAwareBorderStart() const |
| { |
| if (isHorizontalFlow()) |
| return isLeftToRightFlow() ? borderLeft() : borderRight(); |
| return isLeftToRightFlow() ? borderTop() : borderBottom(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::flowAwareBorderEnd() const |
| { |
| if (isHorizontalFlow()) |
| return isLeftToRightFlow() ? borderRight() : borderLeft(); |
| return isLeftToRightFlow() ? borderBottom() : borderTop(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::flowAwareBorderBefore() const |
| { |
| return isHorizontalFlow() ? borderTop() : borderLeft(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::flowAwareBorderAfter() const |
| { |
| return isHorizontalFlow() ? borderBottom() : borderRight(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::flowAwarePaddingStart() const |
| { |
| if (isHorizontalFlow()) |
| return isLeftToRightFlow() ? paddingLeft() : paddingRight(); |
| return isLeftToRightFlow() ? paddingTop() : paddingBottom(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::flowAwarePaddingEnd() const |
| { |
| if (isHorizontalFlow()) |
| return isLeftToRightFlow() ? paddingRight() : paddingLeft(); |
| return isLeftToRightFlow() ? paddingBottom() : paddingTop(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::flowAwarePaddingBefore() const |
| { |
| return isHorizontalFlow() ? paddingTop() : paddingLeft(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::flowAwarePaddingAfter() const |
| { |
| return isHorizontalFlow() ? paddingBottom() : paddingRight(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::flowAwareMarginStartForChild(RenderBox* child) const |
| { |
| if (isHorizontalFlow()) |
| return isLeftToRightFlow() ? child->marginLeft() : child->marginRight(); |
| return isLeftToRightFlow() ? child->marginTop() : child->marginBottom(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::flowAwareMarginEndForChild(RenderBox* child) const |
| { |
| if (isHorizontalFlow()) |
| return isLeftToRightFlow() ? child->marginRight() : child->marginLeft(); |
| return isLeftToRightFlow() ? child->marginBottom() : child->marginTop(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::flowAwareMarginBeforeForChild(RenderBox* child) const |
| { |
| return isHorizontalFlow() ? child->marginTop() : child->marginLeft(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::crossAxisMarginExtentForChild(RenderBox* child) const |
| { |
| return isHorizontalFlow() ? child->marginHeight() : child->marginWidth(); |
| } |
| |
| LayoutPoint RenderFlexibleBox::flowAwareLocationForChild(RenderBox* child) const |
| { |
| return isHorizontalFlow() ? child->location() : child->location().transposedPoint(); |
| } |
| |
| void RenderFlexibleBox::setFlowAwareLocationForChild(RenderBox* child, const LayoutPoint& location) |
| { |
| if (isHorizontalFlow()) |
| child->setLocation(location); |
| else |
| child->setLocation(location.transposedPoint()); |
| } |
| |
| LayoutUnit RenderFlexibleBox::mainAxisBorderAndPaddingExtentForChild(RenderBox* child) const |
| { |
| return isHorizontalFlow() ? child->borderAndPaddingWidth() : child->borderAndPaddingHeight(); |
| } |
| |
| static inline bool preferredMainAxisExtentDependsOnLayout(const Length& flexBasis, bool hasInfiniteLineLength) |
| { |
| return flexBasis.isAuto() || (flexBasis.isPercent() && hasInfiniteLineLength); |
| } |
| |
| bool RenderFlexibleBox::childPreferredMainAxisContentExtentRequiresLayout(RenderBox* child, bool hasInfiniteLineLength) const |
| { |
| return preferredMainAxisExtentDependsOnLayout(flexBasisForChild(child), hasInfiniteLineLength) && hasOrthogonalFlow(child); |
| } |
| |
| LayoutUnit RenderFlexibleBox::preferredMainAxisContentExtentForChild(RenderBox* child, bool hasInfiniteLineLength, bool relayoutChildren) |
| { |
| child->clearOverrideSize(); |
| |
| Length flexBasis = flexBasisForChild(child); |
| if (preferredMainAxisExtentDependsOnLayout(flexBasis, hasInfiniteLineLength)) { |
| LayoutUnit mainAxisExtent; |
| if (hasOrthogonalFlow(child)) { |
| if (child->needsLayout() || relayoutChildren) { |
| m_intrinsicSizeAlongMainAxis.remove(child); |
| child->forceChildLayout(); |
| m_intrinsicSizeAlongMainAxis.set(child, child->logicalHeight()); |
| } |
| ASSERT(m_intrinsicSizeAlongMainAxis.contains(child)); |
| mainAxisExtent = m_intrinsicSizeAlongMainAxis.get(child); |
| } else { |
| mainAxisExtent = child->maxPreferredLogicalWidth(); |
| } |
| ASSERT(mainAxisExtent - mainAxisBorderAndPaddingExtentForChild(child) >= 0); |
| return mainAxisExtent - mainAxisBorderAndPaddingExtentForChild(child); |
| } |
| return std::max(LayoutUnit(0), computeMainAxisExtentForChild(child, MainOrPreferredSize, flexBasis)); |
| } |
| |
| void RenderFlexibleBox::layoutFlexItems(bool relayoutChildren) |
| { |
| Vector<LineContext> lineContexts; |
| OrderedFlexItemList orderedChildren; |
| LayoutUnit sumFlexBaseSize; |
| double totalFlexGrow; |
| double totalWeightedFlexShrink; |
| LayoutUnit sumHypotheticalMainSize; |
| |
| Vector<LayoutUnit, 16> childSizes; |
| |
| m_orderIterator.first(); |
| LayoutUnit crossAxisOffset = flowAwareBorderBefore() + flowAwarePaddingBefore(); |
| bool hasInfiniteLineLength = false; |
| while (computeNextFlexLine(orderedChildren, sumFlexBaseSize, totalFlexGrow, totalWeightedFlexShrink, sumHypotheticalMainSize, hasInfiniteLineLength, relayoutChildren)) { |
| LayoutUnit containerMainInnerSize = mainAxisContentExtent(sumHypotheticalMainSize); |
| LayoutUnit availableFreeSpace = containerMainInnerSize - sumFlexBaseSize; |
| FlexSign flexSign = (sumHypotheticalMainSize < containerMainInnerSize) ? PositiveFlexibility : NegativeFlexibility; |
| InflexibleFlexItemSize inflexibleItems; |
| childSizes.reserveCapacity(orderedChildren.size()); |
| while (!resolveFlexibleLengths(flexSign, orderedChildren, availableFreeSpace, totalFlexGrow, totalWeightedFlexShrink, inflexibleItems, childSizes, hasInfiniteLineLength)) { |
| ASSERT(totalFlexGrow >= 0 && totalWeightedFlexShrink >= 0); |
| ASSERT(inflexibleItems.size() > 0); |
| } |
| |
| layoutAndPlaceChildren(crossAxisOffset, orderedChildren, childSizes, availableFreeSpace, relayoutChildren, lineContexts, hasInfiniteLineLength); |
| } |
| if (hasLineIfEmpty()) { |
| // Even if computeNextFlexLine returns true, the flexbox might not have |
| // a line because all our children might be out of flow positioned. |
| // Instead of just checking if we have a line, make sure the flexbox |
| // has at least a line's worth of height to cover this case. |
| LayoutUnit minHeight = borderAndPaddingLogicalHeight() |
| + lineHeight(true, HorizontalLine, PositionOfInteriorLineBoxes); |
| if (height() < minHeight) |
| setLogicalHeight(minHeight); |
| } |
| |
| updateLogicalHeight(); |
| repositionLogicalHeightDependentFlexItems(lineContexts); |
| } |
| |
| LayoutUnit RenderFlexibleBox::autoMarginOffsetInMainAxis(const OrderedFlexItemList& children, LayoutUnit& availableFreeSpace) |
| { |
| if (availableFreeSpace <= 0) |
| return 0; |
| |
| int numberOfAutoMargins = 0; |
| bool isHorizontal = isHorizontalFlow(); |
| for (size_t i = 0; i < children.size(); ++i) { |
| RenderBox* child = children[i]; |
| if (child->isOutOfFlowPositioned()) |
| continue; |
| if (isHorizontal) { |
| if (child->style()->marginLeft().isAuto()) |
| ++numberOfAutoMargins; |
| if (child->style()->marginRight().isAuto()) |
| ++numberOfAutoMargins; |
| } else { |
| if (child->style()->marginTop().isAuto()) |
| ++numberOfAutoMargins; |
| if (child->style()->marginBottom().isAuto()) |
| ++numberOfAutoMargins; |
| } |
| } |
| if (!numberOfAutoMargins) |
| return 0; |
| |
| LayoutUnit sizeOfAutoMargin = availableFreeSpace / numberOfAutoMargins; |
| availableFreeSpace = 0; |
| return sizeOfAutoMargin; |
| } |
| |
| void RenderFlexibleBox::updateAutoMarginsInMainAxis(RenderBox* child, LayoutUnit autoMarginOffset) |
| { |
| ASSERT(autoMarginOffset >= 0); |
| |
| if (isHorizontalFlow()) { |
| if (child->style()->marginLeft().isAuto()) |
| child->setMarginLeft(autoMarginOffset); |
| if (child->style()->marginRight().isAuto()) |
| child->setMarginRight(autoMarginOffset); |
| } else { |
| if (child->style()->marginTop().isAuto()) |
| child->setMarginTop(autoMarginOffset); |
| if (child->style()->marginBottom().isAuto()) |
| child->setMarginBottom(autoMarginOffset); |
| } |
| } |
| |
| bool RenderFlexibleBox::hasAutoMarginsInCrossAxis(RenderBox* child) const |
| { |
| if (isHorizontalFlow()) |
| return child->style()->marginTop().isAuto() || child->style()->marginBottom().isAuto(); |
| return child->style()->marginLeft().isAuto() || child->style()->marginRight().isAuto(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::availableAlignmentSpaceForChild(LayoutUnit lineCrossAxisExtent, RenderBox* child) |
| { |
| ASSERT(!child->isOutOfFlowPositioned()); |
| LayoutUnit childCrossExtent = crossAxisMarginExtentForChild(child) + crossAxisExtentForChild(child); |
| return lineCrossAxisExtent - childCrossExtent; |
| } |
| |
| LayoutUnit RenderFlexibleBox::availableAlignmentSpaceForChildBeforeStretching(LayoutUnit lineCrossAxisExtent, RenderBox* child) |
| { |
| ASSERT(!child->isOutOfFlowPositioned()); |
| LayoutUnit childCrossExtent = crossAxisMarginExtentForChild(child) + crossAxisIntrinsicExtentForChild(child); |
| return lineCrossAxisExtent - childCrossExtent; |
| } |
| |
| bool RenderFlexibleBox::updateAutoMarginsInCrossAxis(RenderBox* child, LayoutUnit availableAlignmentSpace) |
| { |
| ASSERT(!child->isOutOfFlowPositioned()); |
| ASSERT(availableAlignmentSpace >= 0); |
| |
| bool isHorizontal = isHorizontalFlow(); |
| Length topOrLeft = isHorizontal ? child->style()->marginTop() : child->style()->marginLeft(); |
| Length bottomOrRight = isHorizontal ? child->style()->marginBottom() : child->style()->marginRight(); |
| if (topOrLeft.isAuto() && bottomOrRight.isAuto()) { |
| adjustAlignmentForChild(child, availableAlignmentSpace / 2); |
| if (isHorizontal) { |
| child->setMarginTop(availableAlignmentSpace / 2); |
| child->setMarginBottom(availableAlignmentSpace / 2); |
| } else { |
| child->setMarginLeft(availableAlignmentSpace / 2); |
| child->setMarginRight(availableAlignmentSpace / 2); |
| } |
| return true; |
| } |
| bool shouldAdjustTopOrLeft = true; |
| if (isColumnFlow() && !child->style()->isLeftToRightDirection()) { |
| // For column flows, only make this adjustment if topOrLeft corresponds to the "before" margin, |
| // so that flipForRightToLeftColumn will do the right thing. |
| shouldAdjustTopOrLeft = false; |
| } |
| |
| if (topOrLeft.isAuto()) { |
| if (shouldAdjustTopOrLeft) |
| adjustAlignmentForChild(child, availableAlignmentSpace); |
| |
| if (isHorizontal) |
| child->setMarginTop(availableAlignmentSpace); |
| else |
| child->setMarginLeft(availableAlignmentSpace); |
| return true; |
| } |
| if (bottomOrRight.isAuto()) { |
| if (!shouldAdjustTopOrLeft) |
| adjustAlignmentForChild(child, availableAlignmentSpace); |
| |
| if (isHorizontal) |
| child->setMarginBottom(availableAlignmentSpace); |
| else |
| child->setMarginRight(availableAlignmentSpace); |
| return true; |
| } |
| return false; |
| } |
| |
| LayoutUnit RenderFlexibleBox::marginBoxAscentForChild(RenderBox* child) |
| { |
| LayoutUnit ascent = child->firstLineBoxBaseline(FontBaselineOrAuto()); |
| if (ascent == -1) |
| ascent = crossAxisExtentForChild(child); |
| return ascent + flowAwareMarginBeforeForChild(child); |
| } |
| |
| LayoutUnit RenderFlexibleBox::computeChildMarginValue(Length margin) |
| { |
| // When resolving the margins, we use the content size for resolving percent and calc (for percents in calc expressions) margins. |
| // Fortunately, percent margins are always computed with respect to the block's width, even for margin-top and margin-bottom. |
| LayoutUnit availableSize = contentLogicalWidth(); |
| return minimumValueForLength(margin, availableSize); |
| } |
| |
| void RenderFlexibleBox::prepareOrderIteratorAndMargins() |
| { |
| OrderIteratorPopulator populator(m_orderIterator); |
| |
| for (RenderBox* child = firstChildBox(); child; child = child->nextSiblingBox()) { |
| populator.collectChild(child); |
| |
| if (child->isOutOfFlowPositioned()) |
| continue; |
| |
| // Before running the flex algorithm, 'auto' has a margin of 0. |
| // Also, if we're not auto sizing, we don't do a layout that computes the start/end margins. |
| if (isHorizontalFlow()) { |
| child->setMarginLeft(computeChildMarginValue(child->style()->marginLeft())); |
| child->setMarginRight(computeChildMarginValue(child->style()->marginRight())); |
| } else { |
| child->setMarginTop(computeChildMarginValue(child->style()->marginTop())); |
| child->setMarginBottom(computeChildMarginValue(child->style()->marginBottom())); |
| } |
| } |
| } |
| |
| LayoutUnit RenderFlexibleBox::adjustChildSizeForMinAndMax(RenderBox* child, LayoutUnit childSize) |
| { |
| Length max = isHorizontalFlow() ? child->style()->maxWidth() : child->style()->maxHeight(); |
| if (max.isSpecifiedOrIntrinsic()) { |
| LayoutUnit maxExtent = computeMainAxisExtentForChild(child, MaxSize, max); |
| if (maxExtent != -1 && childSize > maxExtent) |
| childSize = maxExtent; |
| } |
| |
| Length min = isHorizontalFlow() ? child->style()->minWidth() : child->style()->minHeight(); |
| LayoutUnit minExtent = 0; |
| if (min.isSpecifiedOrIntrinsic()) |
| minExtent = computeMainAxisExtentForChild(child, MinSize, min); |
| return std::max(childSize, minExtent); |
| } |
| |
| bool RenderFlexibleBox::computeNextFlexLine(OrderedFlexItemList& orderedChildren, LayoutUnit& sumFlexBaseSize, double& totalFlexGrow, double& totalWeightedFlexShrink, LayoutUnit& sumHypotheticalMainSize, bool& hasInfiniteLineLength, bool relayoutChildren) |
| { |
| orderedChildren.clear(); |
| sumFlexBaseSize = 0; |
| totalFlexGrow = totalWeightedFlexShrink = 0; |
| sumHypotheticalMainSize = 0; |
| |
| if (!m_orderIterator.currentChild()) |
| return false; |
| |
| LayoutUnit lineBreakLength = mainAxisContentExtent(LayoutUnit::max()); |
| hasInfiniteLineLength = lineBreakLength == LayoutUnit::max(); |
| |
| bool lineHasInFlowItem = false; |
| |
| for (RenderBox* child = m_orderIterator.currentChild(); child; child = m_orderIterator.next()) { |
| if (child->isOutOfFlowPositioned()) { |
| orderedChildren.append(child); |
| continue; |
| } |
| |
| LayoutUnit childMainAxisExtent = preferredMainAxisContentExtentForChild(child, hasInfiniteLineLength, relayoutChildren); |
| LayoutUnit childMainAxisMarginBorderPadding = mainAxisBorderAndPaddingExtentForChild(child) |
| + (isHorizontalFlow() ? child->marginWidth() : child->marginHeight()); |
| LayoutUnit childFlexBaseSize = childMainAxisExtent + childMainAxisMarginBorderPadding; |
| |
| LayoutUnit childMinMaxAppliedMainAxisExtent = adjustChildSizeForMinAndMax(child, childMainAxisExtent); |
| LayoutUnit childHypotheticalMainSize = childMinMaxAppliedMainAxisExtent + childMainAxisMarginBorderPadding; |
| |
| if (isMultiline() && sumHypotheticalMainSize + childHypotheticalMainSize > lineBreakLength && lineHasInFlowItem) |
| break; |
| orderedChildren.append(child); |
| lineHasInFlowItem = true; |
| sumFlexBaseSize += childFlexBaseSize; |
| totalFlexGrow += child->style()->flexGrow(); |
| totalWeightedFlexShrink += child->style()->flexShrink() * childMainAxisExtent; |
| sumHypotheticalMainSize += childHypotheticalMainSize; |
| } |
| return true; |
| } |
| |
| void RenderFlexibleBox::freezeViolations(const Vector<Violation>& violations, LayoutUnit& availableFreeSpace, double& totalFlexGrow, double& totalWeightedFlexShrink, InflexibleFlexItemSize& inflexibleItems, bool hasInfiniteLineLength) |
| { |
| for (size_t i = 0; i < violations.size(); ++i) { |
| RenderBox* child = violations[i].child; |
| LayoutUnit childSize = violations[i].childSize; |
| LayoutUnit preferredChildSize = preferredMainAxisContentExtentForChild(child, hasInfiniteLineLength); |
| availableFreeSpace -= childSize - preferredChildSize; |
| totalFlexGrow -= child->style()->flexGrow(); |
| totalWeightedFlexShrink -= child->style()->flexShrink() * preferredChildSize; |
| inflexibleItems.set(child, childSize); |
| } |
| } |
| |
| // Returns true if we successfully ran the algorithm and sized the flex items. |
| bool RenderFlexibleBox::resolveFlexibleLengths(FlexSign flexSign, const OrderedFlexItemList& children, LayoutUnit& availableFreeSpace, double& totalFlexGrow, double& totalWeightedFlexShrink, InflexibleFlexItemSize& inflexibleItems, Vector<LayoutUnit, 16>& childSizes, bool hasInfiniteLineLength) |
| { |
| childSizes.resize(0); |
| LayoutUnit totalViolation = 0; |
| LayoutUnit usedFreeSpace = 0; |
| Vector<Violation> minViolations; |
| Vector<Violation> maxViolations; |
| for (size_t i = 0; i < children.size(); ++i) { |
| RenderBox* child = children[i]; |
| if (child->isOutOfFlowPositioned()) { |
| childSizes.append(0); |
| continue; |
| } |
| |
| if (inflexibleItems.contains(child)) |
| childSizes.append(inflexibleItems.get(child)); |
| else { |
| LayoutUnit preferredChildSize = preferredMainAxisContentExtentForChild(child, hasInfiniteLineLength); |
| LayoutUnit childSize = preferredChildSize; |
| double extraSpace = 0; |
| if (availableFreeSpace > 0 && totalFlexGrow > 0 && flexSign == PositiveFlexibility && std::isfinite(totalFlexGrow)) |
| extraSpace = availableFreeSpace * child->style()->flexGrow() / totalFlexGrow; |
| else if (availableFreeSpace < 0 && totalWeightedFlexShrink > 0 && flexSign == NegativeFlexibility && std::isfinite(totalWeightedFlexShrink)) |
| extraSpace = availableFreeSpace * child->style()->flexShrink() * preferredChildSize / totalWeightedFlexShrink; |
| if (std::isfinite(extraSpace)) |
| childSize += LayoutUnit::fromFloatRound(extraSpace); |
| |
| LayoutUnit adjustedChildSize = adjustChildSizeForMinAndMax(child, childSize); |
| childSizes.append(adjustedChildSize); |
| usedFreeSpace += adjustedChildSize - preferredChildSize; |
| |
| LayoutUnit violation = adjustedChildSize - childSize; |
| if (violation > 0) |
| minViolations.append(Violation(child, adjustedChildSize)); |
| else if (violation < 0) |
| maxViolations.append(Violation(child, adjustedChildSize)); |
| totalViolation += violation; |
| } |
| } |
| |
| if (totalViolation) |
| freezeViolations(totalViolation < 0 ? maxViolations : minViolations, availableFreeSpace, totalFlexGrow, totalWeightedFlexShrink, inflexibleItems, hasInfiniteLineLength); |
| else |
| availableFreeSpace -= usedFreeSpace; |
| |
| return !totalViolation; |
| } |
| |
| static LayoutUnit initialJustifyContentOffset(LayoutUnit availableFreeSpace, EJustifyContent justifyContent, unsigned numberOfChildren) |
| { |
| if (justifyContent == JustifyFlexEnd) |
| return availableFreeSpace; |
| if (justifyContent == JustifyCenter) |
| return availableFreeSpace / 2; |
| if (justifyContent == JustifySpaceAround) { |
| if (availableFreeSpace > 0 && numberOfChildren) |
| return availableFreeSpace / (2 * numberOfChildren); |
| else |
| return availableFreeSpace / 2; |
| } |
| return 0; |
| } |
| |
| static LayoutUnit justifyContentSpaceBetweenChildren(LayoutUnit availableFreeSpace, EJustifyContent justifyContent, unsigned numberOfChildren) |
| { |
| if (availableFreeSpace > 0 && numberOfChildren > 1) { |
| if (justifyContent == JustifySpaceBetween) |
| return availableFreeSpace / (numberOfChildren - 1); |
| if (justifyContent == JustifySpaceAround) |
| return availableFreeSpace / numberOfChildren; |
| } |
| return 0; |
| } |
| |
| void RenderFlexibleBox::setLogicalOverrideSize(RenderBox* child, LayoutUnit childPreferredSize) |
| { |
| if (hasOrthogonalFlow(child)) |
| child->setOverrideLogicalContentHeight(childPreferredSize - child->borderAndPaddingLogicalHeight()); |
| else |
| child->setOverrideLogicalContentWidth(childPreferredSize - child->borderAndPaddingLogicalWidth()); |
| } |
| |
| ItemPosition RenderFlexibleBox::alignmentForChild(RenderBox* child) const |
| { |
| ItemPosition align = resolveAlignment(style(), child->style()); |
| |
| if (align == ItemPositionBaseline && hasOrthogonalFlow(child)) |
| align = ItemPositionFlexStart; |
| |
| if (style()->flexWrap() == FlexWrapReverse) { |
| if (align == ItemPositionFlexStart) |
| align = ItemPositionFlexEnd; |
| else if (align == ItemPositionFlexEnd) |
| align = ItemPositionFlexStart; |
| } |
| |
| return align; |
| } |
| |
| size_t RenderFlexibleBox::numberOfInFlowPositionedChildren(const OrderedFlexItemList& children) const |
| { |
| size_t count = 0; |
| for (size_t i = 0; i < children.size(); ++i) { |
| RenderBox* child = children[i]; |
| if (!child->isOutOfFlowPositioned()) |
| ++count; |
| } |
| return count; |
| } |
| |
| void RenderFlexibleBox::resetAutoMarginsAndLogicalTopInCrossAxis(RenderBox* child) |
| { |
| if (hasAutoMarginsInCrossAxis(child)) { |
| child->updateLogicalHeight(); |
| if (isHorizontalFlow()) { |
| if (child->style()->marginTop().isAuto()) |
| child->setMarginTop(0); |
| if (child->style()->marginBottom().isAuto()) |
| child->setMarginBottom(0); |
| } else { |
| if (child->style()->marginLeft().isAuto()) |
| child->setMarginLeft(0); |
| if (child->style()->marginRight().isAuto()) |
| child->setMarginRight(0); |
| } |
| } |
| } |
| |
| bool RenderFlexibleBox::needToStretchChildLogicalHeight(RenderBox* child) const |
| { |
| if (alignmentForChild(child) != ItemPositionStretch) |
| return false; |
| |
| return isHorizontalFlow() && child->style()->height().isAuto(); |
| } |
| |
| void RenderFlexibleBox::layoutAndPlaceChildren(LayoutUnit& crossAxisOffset, const OrderedFlexItemList& children, const Vector<LayoutUnit, 16>& childSizes, LayoutUnit availableFreeSpace, bool relayoutChildren, Vector<LineContext>& lineContexts, bool hasInfiniteLineLength) |
| { |
| ASSERT(childSizes.size() == children.size()); |
| |
| size_t numberOfChildrenForJustifyContent = numberOfInFlowPositionedChildren(children); |
| LayoutUnit autoMarginOffset = autoMarginOffsetInMainAxis(children, availableFreeSpace); |
| LayoutUnit mainAxisOffset = flowAwareBorderStart() + flowAwarePaddingStart(); |
| mainAxisOffset += initialJustifyContentOffset(availableFreeSpace, style()->justifyContent(), numberOfChildrenForJustifyContent); |
| |
| LayoutUnit totalMainExtent = mainAxisExtent(); |
| LayoutUnit maxAscent = 0, maxDescent = 0; // Used when align-items: baseline. |
| LayoutUnit maxChildCrossAxisExtent = 0; |
| size_t seenInFlowPositionedChildren = 0; |
| bool shouldFlipMainAxis = !isColumnFlow() && !isLeftToRightFlow(); |
| for (size_t i = 0; i < children.size(); ++i) { |
| RenderBox* child = children[i]; |
| |
| if (child->isOutOfFlowPositioned()) { |
| child->containingBlock()->insertPositionedObject(child); |
| continue; |
| } |
| |
| LayoutUnit childPreferredSize = childSizes[i] + mainAxisBorderAndPaddingExtentForChild(child); |
| setLogicalOverrideSize(child, childPreferredSize); |
| if (childPreferredSize != mainAxisExtentForChild(child)) { |
| child->setChildNeedsLayout(MarkOnlyThis); |
| } else { |
| // To avoid double applying margin changes in updateAutoMarginsInCrossAxis, we reset the margins here. |
| resetAutoMarginsAndLogicalTopInCrossAxis(child); |
| } |
| // We may have already forced relayout for orthogonal flowing children in preferredMainAxisContentExtentForChild. |
| bool forceChildRelayout = relayoutChildren && !childPreferredMainAxisContentExtentRequiresLayout(child, hasInfiniteLineLength); |
| updateBlockChildDirtyBitsBeforeLayout(forceChildRelayout, child); |
| child->layoutIfNeeded(); |
| |
| updateAutoMarginsInMainAxis(child, autoMarginOffset); |
| |
| LayoutUnit childCrossAxisMarginBoxExtent; |
| if (alignmentForChild(child) == ItemPositionBaseline && !hasAutoMarginsInCrossAxis(child)) { |
| LayoutUnit ascent = marginBoxAscentForChild(child); |
| LayoutUnit descent = (crossAxisMarginExtentForChild(child) + crossAxisExtentForChild(child)) - ascent; |
| |
| maxAscent = std::max(maxAscent, ascent); |
| maxDescent = std::max(maxDescent, descent); |
| |
| childCrossAxisMarginBoxExtent = maxAscent + maxDescent; |
| } else { |
| childCrossAxisMarginBoxExtent = crossAxisIntrinsicExtentForChild(child) + crossAxisMarginExtentForChild(child); |
| } |
| if (!isColumnFlow()) |
| setLogicalHeight(std::max(logicalHeight(), crossAxisOffset + flowAwareBorderAfter() + flowAwarePaddingAfter() + childCrossAxisMarginBoxExtent)); |
| maxChildCrossAxisExtent = std::max(maxChildCrossAxisExtent, childCrossAxisMarginBoxExtent); |
| |
| mainAxisOffset += flowAwareMarginStartForChild(child); |
| |
| LayoutUnit childMainExtent = mainAxisExtentForChild(child); |
| // In an RTL column situation, this will apply the margin-right/margin-end on the left. |
| // This will be fixed later in flipForRightToLeftColumn. |
| LayoutPoint childLocation(shouldFlipMainAxis ? totalMainExtent - mainAxisOffset - childMainExtent : mainAxisOffset, |
| crossAxisOffset + flowAwareMarginBeforeForChild(child)); |
| |
| // FIXME: Supporting layout deltas. |
| setFlowAwareLocationForChild(child, childLocation); |
| mainAxisOffset += childMainExtent + flowAwareMarginEndForChild(child); |
| |
| ++seenInFlowPositionedChildren; |
| if (seenInFlowPositionedChildren < numberOfChildrenForJustifyContent) |
| mainAxisOffset += justifyContentSpaceBetweenChildren(availableFreeSpace, style()->justifyContent(), numberOfChildrenForJustifyContent); |
| } |
| |
| if (isColumnFlow()) |
| setLogicalHeight(mainAxisOffset + flowAwareBorderEnd() + flowAwarePaddingEnd()); |
| |
| if (style()->flexDirection() == FlowColumnReverse) { |
| // We have to do an extra pass for column-reverse to reposition the flex items since the start depends |
| // on the height of the flexbox, which we only know after we've positioned all the flex items. |
| updateLogicalHeight(); |
| layoutColumnReverse(children, crossAxisOffset, availableFreeSpace); |
| } |
| |
| if (m_numberOfInFlowChildrenOnFirstLine == -1) |
| m_numberOfInFlowChildrenOnFirstLine = seenInFlowPositionedChildren; |
| lineContexts.append(LineContext(crossAxisOffset, maxChildCrossAxisExtent, children.size(), maxAscent)); |
| crossAxisOffset += maxChildCrossAxisExtent; |
| } |
| |
| void RenderFlexibleBox::layoutColumnReverse(const OrderedFlexItemList& children, LayoutUnit crossAxisOffset, LayoutUnit availableFreeSpace) |
| { |
| // This is similar to the logic in layoutAndPlaceChildren, except we place the children |
| // starting from the end of the flexbox. We also don't need to layout anything since we're |
| // just moving the children to a new position. |
| size_t numberOfChildrenForJustifyContent = numberOfInFlowPositionedChildren(children); |
| LayoutUnit mainAxisOffset = logicalHeight() - flowAwareBorderEnd() - flowAwarePaddingEnd(); |
| mainAxisOffset -= initialJustifyContentOffset(availableFreeSpace, style()->justifyContent(), numberOfChildrenForJustifyContent); |
| |
| size_t seenInFlowPositionedChildren = 0; |
| for (size_t i = 0; i < children.size(); ++i) { |
| RenderBox* child = children[i]; |
| |
| if (child->isOutOfFlowPositioned()) |
| continue; |
| |
| mainAxisOffset -= mainAxisExtentForChild(child) + flowAwareMarginEndForChild(child); |
| |
| setFlowAwareLocationForChild(child, LayoutPoint(mainAxisOffset, crossAxisOffset + flowAwareMarginBeforeForChild(child))); |
| |
| mainAxisOffset -= flowAwareMarginStartForChild(child); |
| |
| ++seenInFlowPositionedChildren; |
| if (seenInFlowPositionedChildren < numberOfChildrenForJustifyContent) |
| mainAxisOffset -= justifyContentSpaceBetweenChildren(availableFreeSpace, style()->justifyContent(), numberOfChildrenForJustifyContent); |
| } |
| } |
| |
| static LayoutUnit initialAlignContentOffset(LayoutUnit availableFreeSpace, EAlignContent alignContent, unsigned numberOfLines) |
| { |
| if (numberOfLines <= 1) |
| return 0; |
| if (alignContent == AlignContentFlexEnd) |
| return availableFreeSpace; |
| if (alignContent == AlignContentCenter) |
| return availableFreeSpace / 2; |
| if (alignContent == AlignContentSpaceAround) { |
| if (availableFreeSpace > 0 && numberOfLines) |
| return availableFreeSpace / (2 * numberOfLines); |
| if (availableFreeSpace < 0) |
| return availableFreeSpace / 2; |
| } |
| return 0; |
| } |
| |
| static LayoutUnit alignContentSpaceBetweenChildren(LayoutUnit availableFreeSpace, EAlignContent alignContent, unsigned numberOfLines) |
| { |
| if (availableFreeSpace > 0 && numberOfLines > 1) { |
| if (alignContent == AlignContentSpaceBetween) |
| return availableFreeSpace / (numberOfLines - 1); |
| if (alignContent == AlignContentSpaceAround || alignContent == AlignContentStretch) |
| return availableFreeSpace / numberOfLines; |
| } |
| return 0; |
| } |
| |
| void RenderFlexibleBox::alignFlexLines(Vector<LineContext>& lineContexts) |
| { |
| // If we have a single line flexbox or a multiline line flexbox with only one flex line, |
| // the line height is all the available space. |
| // For flex-direction: row, this means we need to use the height, so we do this after calling updateLogicalHeight. |
| if (lineContexts.size() == 1) { |
| lineContexts[0].crossAxisExtent = crossAxisContentExtent(); |
| return; |
| } |
| |
| if (style()->alignContent() == AlignContentFlexStart) |
| return; |
| |
| LayoutUnit availableCrossAxisSpace = crossAxisContentExtent(); |
| for (size_t i = 0; i < lineContexts.size(); ++i) |
| availableCrossAxisSpace -= lineContexts[i].crossAxisExtent; |
| |
| RenderBox* child = m_orderIterator.first(); |
| LayoutUnit lineOffset = initialAlignContentOffset(availableCrossAxisSpace, style()->alignContent(), lineContexts.size()); |
| for (unsigned lineNumber = 0; lineNumber < lineContexts.size(); ++lineNumber) { |
| lineContexts[lineNumber].crossAxisOffset += lineOffset; |
| for (size_t childNumber = 0; childNumber < lineContexts[lineNumber].numberOfChildren; ++childNumber, child = m_orderIterator.next()) |
| adjustAlignmentForChild(child, lineOffset); |
| |
| if (style()->alignContent() == AlignContentStretch && availableCrossAxisSpace > 0) |
| lineContexts[lineNumber].crossAxisExtent += availableCrossAxisSpace / static_cast<unsigned>(lineContexts.size()); |
| |
| lineOffset += alignContentSpaceBetweenChildren(availableCrossAxisSpace, style()->alignContent(), lineContexts.size()); |
| } |
| } |
| |
| void RenderFlexibleBox::adjustAlignmentForChild(RenderBox* child, LayoutUnit delta) |
| { |
| if (child->isOutOfFlowPositioned()) { |
| return; |
| } |
| |
| setFlowAwareLocationForChild(child, flowAwareLocationForChild(child) + LayoutSize(0, delta)); |
| } |
| |
| void RenderFlexibleBox::alignChildren(const Vector<LineContext>& lineContexts) |
| { |
| // Keep track of the space between the baseline edge and the after edge of the box for each line. |
| Vector<LayoutUnit> minMarginAfterBaselines; |
| |
| RenderBox* child = m_orderIterator.first(); |
| for (size_t lineNumber = 0; lineNumber < lineContexts.size(); ++lineNumber) { |
| LayoutUnit minMarginAfterBaseline = LayoutUnit::max(); |
| LayoutUnit lineCrossAxisExtent = lineContexts[lineNumber].crossAxisExtent; |
| LayoutUnit maxAscent = lineContexts[lineNumber].maxAscent; |
| |
| for (size_t childNumber = 0; childNumber < lineContexts[lineNumber].numberOfChildren; ++childNumber, child = m_orderIterator.next()) { |
| ASSERT(child); |
| if (child->isOutOfFlowPositioned()) { |
| if (style()->flexWrap() == FlexWrapReverse) |
| adjustAlignmentForChild(child, lineCrossAxisExtent); |
| continue; |
| } |
| |
| if (updateAutoMarginsInCrossAxis(child, std::max(LayoutUnit(0), availableAlignmentSpaceForChild(lineCrossAxisExtent, child)))) |
| continue; |
| |
| switch (alignmentForChild(child)) { |
| case ItemPositionAuto: |
| ASSERT_NOT_REACHED(); |
| break; |
| case ItemPositionStretch: { |
| applyStretchAlignmentToChild(child, lineCrossAxisExtent); |
| // Since wrap-reverse flips cross start and cross end, strech children should be aligned with the cross end. |
| if (style()->flexWrap() == FlexWrapReverse) |
| adjustAlignmentForChild(child, availableAlignmentSpaceForChild(lineCrossAxisExtent, child)); |
| break; |
| } |
| case ItemPositionFlexStart: |
| break; |
| case ItemPositionFlexEnd: |
| adjustAlignmentForChild(child, availableAlignmentSpaceForChild(lineCrossAxisExtent, child)); |
| break; |
| case ItemPositionCenter: |
| adjustAlignmentForChild(child, availableAlignmentSpaceForChild(lineCrossAxisExtent, child) / 2); |
| break; |
| case ItemPositionBaseline: { |
| // FIXME: If we get here in columns, we want the use the descent, except we currently can't get the ascent/descent of orthogonal children. |
| // https://bugs.webkit.org/show_bug.cgi?id=98076 |
| LayoutUnit ascent = marginBoxAscentForChild(child); |
| LayoutUnit startOffset = maxAscent - ascent; |
| adjustAlignmentForChild(child, startOffset); |
| |
| if (style()->flexWrap() == FlexWrapReverse) |
| minMarginAfterBaseline = std::min(minMarginAfterBaseline, availableAlignmentSpaceForChild(lineCrossAxisExtent, child) - startOffset); |
| break; |
| } |
| case ItemPositionLastBaseline: |
| case ItemPositionSelfStart: |
| case ItemPositionSelfEnd: |
| case ItemPositionStart: |
| case ItemPositionEnd: |
| case ItemPositionLeft: |
| case ItemPositionRight: |
| // FIXME: File a bug about implementing that. The extended grammar |
| // is not enabled by default so we shouldn't hit this codepath. |
| ASSERT_NOT_REACHED(); |
| break; |
| } |
| } |
| minMarginAfterBaselines.append(minMarginAfterBaseline); |
| } |
| |
| if (style()->flexWrap() != FlexWrapReverse) |
| return; |
| |
| // wrap-reverse flips the cross axis start and end. For baseline alignment, this means we |
| // need to align the after edge of baseline elements with the after edge of the flex line. |
| child = m_orderIterator.first(); |
| for (size_t lineNumber = 0; lineNumber < lineContexts.size(); ++lineNumber) { |
| LayoutUnit minMarginAfterBaseline = minMarginAfterBaselines[lineNumber]; |
| for (size_t childNumber = 0; childNumber < lineContexts[lineNumber].numberOfChildren; ++childNumber, child = m_orderIterator.next()) { |
| ASSERT(child); |
| if (alignmentForChild(child) == ItemPositionBaseline && !hasAutoMarginsInCrossAxis(child) && minMarginAfterBaseline) |
| adjustAlignmentForChild(child, minMarginAfterBaseline); |
| } |
| } |
| } |
| |
| void RenderFlexibleBox::applyStretchAlignmentToChild(RenderBox* child, LayoutUnit lineCrossAxisExtent) |
| { |
| if (!isColumnFlow() && child->style()->logicalHeight().isAuto()) { |
| // FIXME: If the child has orthogonal flow, then it already has an override height set, so use it. |
| if (!hasOrthogonalFlow(child)) { |
| LayoutUnit heightBeforeStretching = needToStretchChildLogicalHeight(child) ? constrainedChildIntrinsicContentLogicalHeight(child) : child->logicalHeight(); |
| LayoutUnit stretchedLogicalHeight = heightBeforeStretching + availableAlignmentSpaceForChildBeforeStretching(lineCrossAxisExtent, child); |
| ASSERT(!child->needsLayout()); |
| LayoutUnit desiredLogicalHeight = child->constrainLogicalHeightByMinMax(stretchedLogicalHeight, heightBeforeStretching - child->borderAndPaddingLogicalHeight()); |
| |
| // FIXME: Can avoid laying out here in some cases. See https://webkit.org/b/87905. |
| if (desiredLogicalHeight != child->logicalHeight()) { |
| child->setOverrideLogicalContentHeight(desiredLogicalHeight - child->borderAndPaddingLogicalHeight()); |
| child->setLogicalHeight(0); |
| child->forceChildLayout(); |
| } |
| } |
| } else if (isColumnFlow() && child->style()->logicalWidth().isAuto()) { |
| // FIXME: If the child doesn't have orthogonal flow, then it already has an override width set, so use it. |
| if (hasOrthogonalFlow(child)) { |
| LayoutUnit childWidth = std::max<LayoutUnit>(0, lineCrossAxisExtent - crossAxisMarginExtentForChild(child)); |
| childWidth = child->constrainLogicalWidthByMinMax(childWidth, childWidth, this); |
| |
| if (childWidth != child->logicalWidth()) { |
| child->setOverrideLogicalContentWidth(childWidth - child->borderAndPaddingLogicalWidth()); |
| child->forceChildLayout(); |
| } |
| } |
| } |
| } |
| |
| void RenderFlexibleBox::flipForRightToLeftColumn() |
| { |
| if (style()->isLeftToRightDirection() || !isColumnFlow()) |
| return; |
| |
| LayoutUnit crossExtent = crossAxisExtent(); |
| for (RenderBox* child = m_orderIterator.first(); child; child = m_orderIterator.next()) { |
| if (child->isOutOfFlowPositioned()) |
| continue; |
| LayoutPoint location = flowAwareLocationForChild(child); |
| // For vertical flows, setFlowAwareLocationForChild will transpose x and y, |
| // so using the y axis for a column cross axis extent is correct. |
| location.setY(crossExtent - crossAxisExtentForChild(child) - location.y()); |
| setFlowAwareLocationForChild(child, location); |
| } |
| } |
| |
| void RenderFlexibleBox::flipForWrapReverse(const Vector<LineContext>& lineContexts, LayoutUnit crossAxisStartEdge) |
| { |
| LayoutUnit contentExtent = crossAxisContentExtent(); |
| RenderBox* child = m_orderIterator.first(); |
| for (size_t lineNumber = 0; lineNumber < lineContexts.size(); ++lineNumber) { |
| for (size_t childNumber = 0; childNumber < lineContexts[lineNumber].numberOfChildren; ++childNumber, child = m_orderIterator.next()) { |
| ASSERT(child); |
| LayoutUnit lineCrossAxisExtent = lineContexts[lineNumber].crossAxisExtent; |
| LayoutUnit originalOffset = lineContexts[lineNumber].crossAxisOffset - crossAxisStartEdge; |
| LayoutUnit newOffset = contentExtent - originalOffset - lineCrossAxisExtent; |
| adjustAlignmentForChild(child, newOffset - originalOffset); |
| } |
| } |
| } |
| |
| } |
