Language Server Protocol (LSP) support is available in the Dart analysis server from version 2.2.0 of the SDK (which was included in version 1.2.1 of Flutter). The supported messages are detailed below (for the version of the SDK that matches this README).
The analysis server snapshot is included in the bin/snapshots
folder of the Dart SDK. Pass the --lsp
flag to start the server in LSP mode and the --client-id
and --client-version
flags to identify your editor/plugin and version:
dart bin/snapshots/analysis_server.dart.snapshot --lsp --client-id my-editor.my-plugin --client-version 1.2
Note: In LSP the client makes the first request so there is no obvious confirmation that the server is working correctly until the client sends an initialize
request. Unlike standard JSON RPC, LSP requires that headers are sent.
When there are no open workspace folders (or if the initialization option onlyAnalyzeProjectsWithOpenFiles
is set to true
), analysis will be performed based on project folders located by the open files. For each open file, the project root will be located, and that whole project analyzed. If the file does not have a project (eg. there is no pubspec.yaml in its ancestor folders) then the file will be analyzed in isolation.
onlyAnalyzeProjectsWithOpenFiles
: When set to true
, workspace folders will be ignored and analysis will be performed based on the open files, as if no workspace was open at all. This allows opening large folders without causing them to be completely analyzed. Defaults to false
.suggestFromUnimportedLibraries
: When set to false
, completion will not include synbols that are not already imported into the current file. Defaults to true
, though the client must additionally support workspace/applyEdit
for these completions to be included.closingLabels
: When set to true
, dart/textDocument/publishClosingLabels
notifications will be sent with information to render editor closing labels.outline
: When set to true
, dart/textDocument/publishOutline
notifications will be sent with outline information for open files.flutterOutline
: When set to true
, dart/textDocument/publishFlutterOutline
notifications will be sent with Flutter outline information for open files.Client workspace settings are requested with workspace/configuration
during initialization and re-requested whenever the client notifies the server with workspace/didChangeConfiguration
. This allows the settings to take effect without restarting the server.
dart.analysisExcludedFolders
: An array of paths (absolute or relative to each workspace folder) that should be excluded from analysis.dart.enableSdkFormatter
: When set to false
, prevents registration (or unregisters) the SDK formatter. When set to true
or not supplied, will register/reregister the SDK formatter.dart.lineLength
: The number of characters the formatter should wrap code at. If unspecified, code will be wrapped at 80
characters.dart.completeFunctionCalls
: Completes functions/methods with their required parameters.dart.showTodos
: Whether to generate diagnostics for TODO comments. If unspecified, diagnostics will not be generated.Below is a list of LSP methods and their implementation status.
Method | Basic Impl | Capabilities | Plugins | Tests | Tested Client | Notes |
---|---|---|---|---|---|---|
initialize | ✅ | ✅ | N/A | ✅ | ✅ | trace and other options NYI |
initialized | ✅ | ✅ | N/A | ✅ | ✅ | |
shutdown | ✅ | ✅ | N/A | ✅ | ✅ | supported but does nothing |
exit | ✅ | ✅ | N/A | ✅ | ✅ | |
$/cancelRequest | ✅ | ✅ | ✅ | ✅ | ||
window/showMessage | ✅ | |||||
window/showMessageRequest | ||||||
window/logMessage | ✅ | |||||
telemetry/event | ||||||
client/registerCapability | ✅ | ✅ | ✅ | ✅ | ✅ | |
client/unregisterCapability | ✅ | ✅ | ✅ | ✅ | ✅ | |
workspace/workspaceFolders | ||||||
workspace/didChangeWorkspaceFolders | ✅ | ✅ | ✅ | ✅ | ✅ | |
workspace/didChangeConfiguration | ✅ | ✅ | ✅ | ✅ | ||
workspace/configuration | ✅ | ✅ | ✅ | ✅ | ||
workspace/didChangeWatchedFiles | unused, server does own watching | |||||
workspace/symbol | ✅ | ✅ | ✅ | ✅ | ||
workspace/executeCommand | ✅ | ✅ | ✅ | ✅ | ||
workspace/applyEdit | ✅ | ✅ | ✅ | ✅ | ||
workspace/onWillRenameFiles | ✅ | ✅ | ✅ | ✅ | ||
textDocument/didOpen | ✅ | ✅ | ✅ | ✅ | ✅ | |
textDocument/didChange | ✅ | ✅ | ✅ | ✅ | ✅ | |
textDocument/willSave | ||||||
textDocument/willSaveWaitUntil | ||||||
textDocument/didClose | ✅ | ✅ | ✅ | ✅ | ✅ | |
textDocument/publishDiagnostics | ✅ | ✅ | ✅ | ✅ | ✅ | |
textDocument/completion | ✅ | ✅ | ✅ | ✅ | ✅ | |
completionItem/resolve | ✅ | ✅ | ✅ | ✅ | ✅ | |
textDocument/hover | ✅ | ✅ | ✅ | ✅ | ||
textDocument/signatureHelp | ✅ | ✅ | ✅ | ✅ | trigger character handling outstanding | |
textDocument/declaration | ||||||
textDocument/definition | ✅ | ✅ | ✅ | ✅ | ✅ | |
textDocument/typeDefinition | ||||||
textDocument/implementation | ✅ | ✅ | ✅ | ✅ | ||
textDocument/references | ✅ | ✅ | ✅ | ✅ | ||
textDocument/documentHighlight | ✅ | ✅ | ✅ | ✅ | ||
textDocument/documentSymbol | ✅ | ✅ | ✅ | ✅ | ||
textDocument/codeAction (sortMembers) | ✅ | ✅ | ✅ | ✅ | ||
textDocument/codeAction (organiseImports) | ✅ | ✅ | ✅ | ✅ | ||
textDocument/codeAction (refactors) | ✅ | ✅ | ✅ | ✅ | ||
textDocument/codeAction (assists) | ✅ | ✅ | ✅ | ✅ | Only if the client advertises codeActionLiteralSupport with Refactor | |
textDocument/codeAction (fixes) | ✅ | ✅ | ✅ | ✅ | Only if the client advertises codeActionLiteralSupport with QuickFix | |
textDocument/codeLens | ||||||
codeLens/resolve | ||||||
textDocument/documentLink | ||||||
documentLink/resolve | ||||||
textDocument/documentColor | ||||||
textDocument/colorPresentation | ||||||
textDocument/formatting | ✅ | ✅ | ✅ | ✅ | ||
textDocument/rangeFormatting | ✅ | ✅ | ✅ | ✅ | ||
textDocument/onTypeFormatting | ✅ | ✅ | ✅ | ✅ | ||
textDocument/rename | ✅ | ✅ | ✅ | ✅ | ||
textDocument/prepareRename | ✅ | ✅ | ✅ | ✅ | ||
textDocument/foldingRange | ✅ | ✅ | ✅ | ✅ | ✅ | |
textDocument/semanticTokens/full | ✅ | ✅ | ✅ | ✅ | ✅ | |
textDocument/semanticTokens/range | ✅ | ✅ | ✅ | ✅ | ✅ |
The following custom methods/notifications are also provided by the Dart LSP server:
Direction: Client -> Server Params: None Returns: { port: number }
Starts the analzyer diagnostics server (if not already running) and returns the port number it's listening on.
Direction: Client -> Server Params: None Returns: None
Forces re-reading of all potentially changed files, re-resolving of all referenced URIs, and corresponding re-analysis of everything affected in the current analysis roots. Clients should not usually need to call this method - needing to do so may indicate a bug in the server.
Direction: Client -> Server Params: TextDocumentPositionParams
Returns: Location | null
Returns the location of the super definition of the class or method at the provided position or null
if there isn't one.
Direction: Server -> Client Params: { isAnalyzing: boolean }
Notifies the client when analysis starts/completes.
This notification is not sent if the client capabilities include window.workDoneProgress == true
because analyzing status events will be sent using $/progress
.
This notification may be removed in a future Dart SDK release and should not be depended on.
Direction: Server -> Client Params: { uri: string, labels: { label: string, range: Range }[] }
Notifies the client when closing label information is available (or updated) for a file.
Direction: Server -> Client Params: { uri: string, outline: Outline }
Outline: { element: Element, range: Range, codeRange: Range, children: Outline[] }
Element: { name: string, range: Range, kind: string, parameters: string | undefined, typeParameters: string | undefined, returnType: string | undefined }
Notifies the client when outline information is available (or updated) for a file.
Nodes contains multiple ranges:
element.range
- the range of the name in the declaration of the elementrange
- the entire range of the declaration including dartdocscodeRange
- the range of code part of the declaration (excluding dartdocs and annotations) - typically used when navigating to the declarationDirection: Server -> Client Params: { uri: string, outline: FlutterOutline }
FlutterOutline: { dartElement: Element | undefined, range: Range, codeRange: Range, children: Outline[], kind: string, label: string | undefined, className: string | undefined, variableName: string | undefined, attributes: FlutterOutlineAttribute[] | undefined }
FlutterOutlineAttribute: { name: string, label: string }
Element: as defined for the dart/textDocument/publishOutline
notification.
Notifies the client when Flutter outline information is available (or updated) for a file.
Nodes contains multiple ranges as desribed for the dart/textDocument/publishOutline
notification.