# Copyright (c) 2012 Google Inc. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
#
#     * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#     * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following disclaimer
# in the documentation and/or other materials provided with the
# distribution.
#     * Neither the name of Google Inc. nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

# FIXME: remove this whitespace diff.
#
[MASTER]

# Specify a configuration file.
#rcfile=

# Python code to execute, usually for sys.path manipulation such as
# pygtk.require().
#init-hook=

# Profiled execution.
profile=no

# Add files or directories to the blacklist. They should be base names, not
# paths.
ignore=CVS

# Pickle collected data for later comparisons.
persistent=yes

# List of plugins (as comma separated values of python modules names) to load,
# usually to register additional checkers.
load-plugins=


[MESSAGES CONTROL]

# Enable the message, report, category or checker with the given id(s). You can
# either give multiple identifier separated by comma (,) or put this option
# multiple time.
#enable=

# Disable the message, report, category or checker with the given id(s). You
# can either give multiple identifier separated by comma (,) or put this option
# multiple time (only on the command line, not in the configuration file where
# it should appear only once).
# CHANGED:
# C0103: Invalid name ""
# C0111: Missing docstring
# C0301: Line too long
# C0302: Too many lines in module (N)
# I0010: Unable to consider inline option ''
# I0011: Locally disabling WNNNN
#
# R0201: Method could be a function
# R0801: Similar lines in N files
# R0901: Too many ancestors (8/7)
# R0902: Too many instance attributes (N/7)
# R0903: Too few public methods (N/2)
# R0904: Too many public methods (N/20)
# R0911: Too many return statements (N/6)
# R0912: Too many branches (N/12)
# R0913: Too many arguments (N/5)
# R0914: Too many local variables (N/15)
# R0915: Too many statements (N/50)
# R0921: Abstract class not referenced
# R0922: Abstract class is only referenced 1 times
# W0122: Use of the exec statement
# W0141: Used builtin function ''
# W0212: Access to a protected member X of a client class
# W0142: Used * or ** magic
# W0401: Wildcard import X
# W0402: Uses of a deprecated module 'string'
# W0404: 41: Reimport 'XX' (imported line NN)
# W0511: TODO
# W0603: Using the global statement
# W0614: Unused import X from wildcard import
# W0703: Catch "Exception"
# W1201: Specify string format arguments as logging function parameters
disable=C0103,C0111,C0301,C0302,I0010,I0011,R0201,R0801,R0901,R0902,R0903,R0904,R0911,R0912,R0913,R0914,R0915,R0921,R0922,W0122,W0141,W0142,W0212,W0401,W0402,W0404,W0511,W0603,W0614,W0703,W1201


[REPORTS]

# Set the output format. Available formats are text, parseable, colorized, msvs
# (visual studio) and html
output-format=text

# Include message's id in output
include-ids=yes

# Put messages in a separate file for each module / package specified on the
# command line instead of printing them on stdout. Reports (if any) will be
# written in a file name "pylint_global.[txt|html]".
files-output=no

# Tells whether to display a full report or only the messages
# CHANGED:
reports=no

# Python expression which should return a note less than 10 (10 is the highest
# note). You have access to the variables errors warning, statement which
# respectively contain the number of errors / warnings messages and the total
# number of statements analyzed. This is used by the global evaluation report
# (RP0004).
evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)

# Add a comment according to your evaluation note. This is used by the global
# evaluation report (RP0004).
comment=no


[VARIABLES]

# Tells whether we should check for unused import in __init__ files.
init-import=no

# A regular expression matching the beginning of the name of dummy variables
# (i.e. not used).
dummy-variables-rgx=_|dummy

# List of additional names supposed to be defined in builtins. Remember that
# you should avoid to define new builtins when possible.
additional-builtins=


[TYPECHECK]

# Tells whether missing members accessed in mixin class should be ignored. A
# mixin class is detected if its name ends with "mixin" (case insensitive).
ignore-mixin-members=yes

# List of classes names for which member attributes should not be checked
# (useful for classes with attributes dynamically set).
ignored-classes=SQLObject,twisted.internet.reactor,hashlib,google.appengine.api.memcache

# When zope mode is activated, add a predefined set of Zope acquired attributes
# to generated-members.
zope=no

# List of members which are set dynamically and missed by pylint inference
# system, and so shouldn't trigger E0201 when accessed. Python regular
# expressions are accepted.
generated-members=REQUEST,acl_users,aq_parent


[MISCELLANEOUS]

# List of note tags to take in consideration, separated by a comma.
notes=FIXME,XXX,TODO


[SIMILARITIES]

# Minimum lines number of a similarity.
min-similarity-lines=4

# Ignore comments when computing similarities.
ignore-comments=yes

# Ignore docstrings when computing similarities.
ignore-docstrings=yes


[FORMAT]

# Maximum number of characters on a single line.
max-line-length=200

# Maximum number of lines in a module
max-module-lines=1000

# String used as indentation unit. This is usually " " (4 spaces) or "\t" (1
# tab).
# CHANGED:
indent-string='    '


[BASIC]

# Required attributes for module, separated by a comma
required-attributes=

# List of builtins function names that should not be used, separated by a comma
bad-functions=map,filter,apply,input

# Regular expression which should only match correct module names
module-rgx=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$

# Regular expression which should only match correct module level names
const-rgx=(([A-Z_][A-Z0-9_]*)|(__.*__))$

# Regular expression which should only match correct class names
class-rgx=[A-Z_][a-zA-Z0-9]+$

# Regular expression which should only match correct function names
function-rgx=[a-z_][a-z0-9_]{2,30}$

# Regular expression which should only match correct method names
method-rgx=[a-z_][a-z0-9_]{2,30}$

# Regular expression which should only match correct instance attribute names
attr-rgx=[a-z_][a-z0-9_]{2,30}$

# Regular expression which should only match correct argument names
argument-rgx=[a-z_][a-z0-9_]{2,30}$

# Regular expression which should only match correct variable names
variable-rgx=[a-z_][a-z0-9_]{2,30}$

# Regular expression which should only match correct list comprehension /
# generator expression variable names
inlinevar-rgx=[A-Za-z_][A-Za-z0-9_]*$

# Good variable names which should always be accepted, separated by a comma
good-names=i,j,k,ex,Run,_

# Bad variable names which should always be refused, separated by a comma
bad-names=foo,bar,baz,toto,tutu,tata

# Regular expression which should only match functions or classes name which do
# not require a docstring
no-docstring-rgx=__.*__


[DESIGN]

# Maximum number of arguments for function / method
max-args=5

# Argument names that match this expression will be ignored. Default to name
# with leading underscore
ignored-argument-names=_.*

# Maximum number of locals for function / method body
max-locals=15

# Maximum number of return / yield for function / method body
max-returns=6

# Maximum number of branch for function / method body
max-branchs=12

# Maximum number of statements in function / method body
max-statements=50

# Maximum number of parents for a class (see R0901).
max-parents=7

# Maximum number of attributes for a class (see R0902).
max-attributes=7

# Minimum number of public methods for a class (see R0903).
min-public-methods=2

# Maximum number of public methods for a class (see R0904).
max-public-methods=20


[CLASSES]

# List of interface methods to ignore, separated by a comma. This is used for
# instance to not check methods defines in Zope's Interface base class.
ignore-iface-methods=isImplementedBy,deferred,extends,names,namesAndDescriptions,queryDescriptionFor,getBases,getDescriptionFor,getDoc,getName,getTaggedValue,getTaggedValueTags,isEqualOrExtendedBy,setTaggedValue,isImplementedByInstancesOf,adaptWith,is_implemented_by

# List of method names used to declare (i.e. assign) instance attributes.
defining-attr-methods=__init__,__new__,setUp

# List of valid names for the first argument in a class method.
valid-classmethod-first-arg=cls


[IMPORTS]

# Deprecated modules which should not be used, separated by a comma
deprecated-modules=regsub,string,TERMIOS,Bastion,rexec

# Create a graph of every (i.e. internal and external) dependencies in the
# given file (report RP0402 must not be disabled)
import-graph=

# Create a graph of external dependencies in the given file (report RP0402 must
# not be disabled)
ext-import-graph=

# Create a graph of internal dependencies in the given file (report RP0402 must
# not be disabled)
int-import-graph=


[EXCEPTIONS]

# Exceptions that will emit a warning when being caught. Defaults to
# "Exception"
overgeneral-exceptions=Exception