| // This file is generated from a similarly-named Perl script in the BoringSSL |
| // source tree. Do not edit by hand. |
| |
| #if !defined(__has_feature) |
| #define __has_feature(x) 0 |
| #endif |
| #if __has_feature(memory_sanitizer) && !defined(OPENSSL_NO_ASM) |
| #define OPENSSL_NO_ASM |
| #endif |
| |
| #if !defined(OPENSSL_NO_ASM) |
| #if defined(__aarch64__) |
| #if defined(BORINGSSL_PREFIX) |
| #include <boringssl_prefix_symbols_asm.h> |
| #endif |
| #include <openssl/arm_arch.h> |
| |
| .text |
| |
| .globl gcm_init_neon |
| .hidden gcm_init_neon |
| .type gcm_init_neon,%function |
| .align 4 |
| gcm_init_neon: |
| AARCH64_VALID_CALL_TARGET |
| // This function is adapted from gcm_init_v8. xC2 is t3. |
| ld1 {v17.2d}, [x1] // load H |
| movi v19.16b, #0xe1 |
| shl v19.2d, v19.2d, #57 // 0xc2.0 |
| ext v3.16b, v17.16b, v17.16b, #8 |
| ushr v18.2d, v19.2d, #63 |
| dup v17.4s, v17.s[1] |
| ext v16.16b, v18.16b, v19.16b, #8 // t0=0xc2....01 |
| ushr v18.2d, v3.2d, #63 |
| sshr v17.4s, v17.4s, #31 // broadcast carry bit |
| and v18.16b, v18.16b, v16.16b |
| shl v3.2d, v3.2d, #1 |
| ext v18.16b, v18.16b, v18.16b, #8 |
| and v16.16b, v16.16b, v17.16b |
| orr v3.16b, v3.16b, v18.16b // H<<<=1 |
| eor v5.16b, v3.16b, v16.16b // twisted H |
| st1 {v5.2d}, [x0] // store Htable[0] |
| ret |
| .size gcm_init_neon,.-gcm_init_neon |
| |
| .globl gcm_gmult_neon |
| .hidden gcm_gmult_neon |
| .type gcm_gmult_neon,%function |
| .align 4 |
| gcm_gmult_neon: |
| AARCH64_VALID_CALL_TARGET |
| ld1 {v3.16b}, [x0] // load Xi |
| ld1 {v5.1d}, [x1], #8 // load twisted H |
| ld1 {v6.1d}, [x1] |
| adrp x9, .Lmasks // load constants |
| add x9, x9, :lo12:.Lmasks |
| ld1 {v24.2d, v25.2d}, [x9] |
| rev64 v3.16b, v3.16b // byteswap Xi |
| ext v3.16b, v3.16b, v3.16b, #8 |
| eor v7.8b, v5.8b, v6.8b // Karatsuba pre-processing |
| |
| mov x3, #16 |
| b .Lgmult_neon |
| .size gcm_gmult_neon,.-gcm_gmult_neon |
| |
| .globl gcm_ghash_neon |
| .hidden gcm_ghash_neon |
| .type gcm_ghash_neon,%function |
| .align 4 |
| gcm_ghash_neon: |
| AARCH64_VALID_CALL_TARGET |
| ld1 {v0.16b}, [x0] // load Xi |
| ld1 {v5.1d}, [x1], #8 // load twisted H |
| ld1 {v6.1d}, [x1] |
| adrp x9, .Lmasks // load constants |
| add x9, x9, :lo12:.Lmasks |
| ld1 {v24.2d, v25.2d}, [x9] |
| rev64 v0.16b, v0.16b // byteswap Xi |
| ext v0.16b, v0.16b, v0.16b, #8 |
| eor v7.8b, v5.8b, v6.8b // Karatsuba pre-processing |
| |
| .Loop_neon: |
| ld1 {v3.16b}, [x2], #16 // load inp |
| rev64 v3.16b, v3.16b // byteswap inp |
| ext v3.16b, v3.16b, v3.16b, #8 |
| eor v3.16b, v3.16b, v0.16b // inp ^= Xi |
| |
| .Lgmult_neon: |
| // Split the input into v3 and v4. (The upper halves are unused, |
| // so it is okay to leave them alone.) |
| ins v4.d[0], v3.d[1] |
| ext v16.8b, v5.8b, v5.8b, #1 // A1 |
| pmull v16.8h, v16.8b, v3.8b // F = A1*B |
| ext v0.8b, v3.8b, v3.8b, #1 // B1 |
| pmull v0.8h, v5.8b, v0.8b // E = A*B1 |
| ext v17.8b, v5.8b, v5.8b, #2 // A2 |
| pmull v17.8h, v17.8b, v3.8b // H = A2*B |
| ext v19.8b, v3.8b, v3.8b, #2 // B2 |
| pmull v19.8h, v5.8b, v19.8b // G = A*B2 |
| ext v18.8b, v5.8b, v5.8b, #3 // A3 |
| eor v16.16b, v16.16b, v0.16b // L = E + F |
| pmull v18.8h, v18.8b, v3.8b // J = A3*B |
| ext v0.8b, v3.8b, v3.8b, #3 // B3 |
| eor v17.16b, v17.16b, v19.16b // M = G + H |
| pmull v0.8h, v5.8b, v0.8b // I = A*B3 |
| |
| // Here we diverge from the 32-bit version. It computes the following |
| // (instructions reordered for clarity): |
| // |
| // veor $t0#lo, $t0#lo, $t0#hi @ t0 = P0 + P1 (L) |
| // vand $t0#hi, $t0#hi, $k48 |
| // veor $t0#lo, $t0#lo, $t0#hi |
| // |
| // veor $t1#lo, $t1#lo, $t1#hi @ t1 = P2 + P3 (M) |
| // vand $t1#hi, $t1#hi, $k32 |
| // veor $t1#lo, $t1#lo, $t1#hi |
| // |
| // veor $t2#lo, $t2#lo, $t2#hi @ t2 = P4 + P5 (N) |
| // vand $t2#hi, $t2#hi, $k16 |
| // veor $t2#lo, $t2#lo, $t2#hi |
| // |
| // veor $t3#lo, $t3#lo, $t3#hi @ t3 = P6 + P7 (K) |
| // vmov.i64 $t3#hi, #0 |
| // |
| // $kN is a mask with the bottom N bits set. AArch64 cannot compute on |
| // upper halves of SIMD registers, so we must split each half into |
| // separate registers. To compensate, we pair computations up and |
| // parallelize. |
| |
| ext v19.8b, v3.8b, v3.8b, #4 // B4 |
| eor v18.16b, v18.16b, v0.16b // N = I + J |
| pmull v19.8h, v5.8b, v19.8b // K = A*B4 |
| |
| // This can probably be scheduled more efficiently. For now, we just |
| // pair up independent instructions. |
| zip1 v20.2d, v16.2d, v17.2d |
| zip1 v22.2d, v18.2d, v19.2d |
| zip2 v21.2d, v16.2d, v17.2d |
| zip2 v23.2d, v18.2d, v19.2d |
| eor v20.16b, v20.16b, v21.16b |
| eor v22.16b, v22.16b, v23.16b |
| and v21.16b, v21.16b, v24.16b |
| and v23.16b, v23.16b, v25.16b |
| eor v20.16b, v20.16b, v21.16b |
| eor v22.16b, v22.16b, v23.16b |
| zip1 v16.2d, v20.2d, v21.2d |
| zip1 v18.2d, v22.2d, v23.2d |
| zip2 v17.2d, v20.2d, v21.2d |
| zip2 v19.2d, v22.2d, v23.2d |
| |
| ext v16.16b, v16.16b, v16.16b, #15 // t0 = t0 << 8 |
| ext v17.16b, v17.16b, v17.16b, #14 // t1 = t1 << 16 |
| pmull v0.8h, v5.8b, v3.8b // D = A*B |
| ext v19.16b, v19.16b, v19.16b, #12 // t3 = t3 << 32 |
| ext v18.16b, v18.16b, v18.16b, #13 // t2 = t2 << 24 |
| eor v16.16b, v16.16b, v17.16b |
| eor v18.16b, v18.16b, v19.16b |
| eor v0.16b, v0.16b, v16.16b |
| eor v0.16b, v0.16b, v18.16b |
| eor v3.8b, v3.8b, v4.8b // Karatsuba pre-processing |
| ext v16.8b, v7.8b, v7.8b, #1 // A1 |
| pmull v16.8h, v16.8b, v3.8b // F = A1*B |
| ext v1.8b, v3.8b, v3.8b, #1 // B1 |
| pmull v1.8h, v7.8b, v1.8b // E = A*B1 |
| ext v17.8b, v7.8b, v7.8b, #2 // A2 |
| pmull v17.8h, v17.8b, v3.8b // H = A2*B |
| ext v19.8b, v3.8b, v3.8b, #2 // B2 |
| pmull v19.8h, v7.8b, v19.8b // G = A*B2 |
| ext v18.8b, v7.8b, v7.8b, #3 // A3 |
| eor v16.16b, v16.16b, v1.16b // L = E + F |
| pmull v18.8h, v18.8b, v3.8b // J = A3*B |
| ext v1.8b, v3.8b, v3.8b, #3 // B3 |
| eor v17.16b, v17.16b, v19.16b // M = G + H |
| pmull v1.8h, v7.8b, v1.8b // I = A*B3 |
| |
| // Here we diverge from the 32-bit version. It computes the following |
| // (instructions reordered for clarity): |
| // |
| // veor $t0#lo, $t0#lo, $t0#hi @ t0 = P0 + P1 (L) |
| // vand $t0#hi, $t0#hi, $k48 |
| // veor $t0#lo, $t0#lo, $t0#hi |
| // |
| // veor $t1#lo, $t1#lo, $t1#hi @ t1 = P2 + P3 (M) |
| // vand $t1#hi, $t1#hi, $k32 |
| // veor $t1#lo, $t1#lo, $t1#hi |
| // |
| // veor $t2#lo, $t2#lo, $t2#hi @ t2 = P4 + P5 (N) |
| // vand $t2#hi, $t2#hi, $k16 |
| // veor $t2#lo, $t2#lo, $t2#hi |
| // |
| // veor $t3#lo, $t3#lo, $t3#hi @ t3 = P6 + P7 (K) |
| // vmov.i64 $t3#hi, #0 |
| // |
| // $kN is a mask with the bottom N bits set. AArch64 cannot compute on |
| // upper halves of SIMD registers, so we must split each half into |
| // separate registers. To compensate, we pair computations up and |
| // parallelize. |
| |
| ext v19.8b, v3.8b, v3.8b, #4 // B4 |
| eor v18.16b, v18.16b, v1.16b // N = I + J |
| pmull v19.8h, v7.8b, v19.8b // K = A*B4 |
| |
| // This can probably be scheduled more efficiently. For now, we just |
| // pair up independent instructions. |
| zip1 v20.2d, v16.2d, v17.2d |
| zip1 v22.2d, v18.2d, v19.2d |
| zip2 v21.2d, v16.2d, v17.2d |
| zip2 v23.2d, v18.2d, v19.2d |
| eor v20.16b, v20.16b, v21.16b |
| eor v22.16b, v22.16b, v23.16b |
| and v21.16b, v21.16b, v24.16b |
| and v23.16b, v23.16b, v25.16b |
| eor v20.16b, v20.16b, v21.16b |
| eor v22.16b, v22.16b, v23.16b |
| zip1 v16.2d, v20.2d, v21.2d |
| zip1 v18.2d, v22.2d, v23.2d |
| zip2 v17.2d, v20.2d, v21.2d |
| zip2 v19.2d, v22.2d, v23.2d |
| |
| ext v16.16b, v16.16b, v16.16b, #15 // t0 = t0 << 8 |
| ext v17.16b, v17.16b, v17.16b, #14 // t1 = t1 << 16 |
| pmull v1.8h, v7.8b, v3.8b // D = A*B |
| ext v19.16b, v19.16b, v19.16b, #12 // t3 = t3 << 32 |
| ext v18.16b, v18.16b, v18.16b, #13 // t2 = t2 << 24 |
| eor v16.16b, v16.16b, v17.16b |
| eor v18.16b, v18.16b, v19.16b |
| eor v1.16b, v1.16b, v16.16b |
| eor v1.16b, v1.16b, v18.16b |
| ext v16.8b, v6.8b, v6.8b, #1 // A1 |
| pmull v16.8h, v16.8b, v4.8b // F = A1*B |
| ext v2.8b, v4.8b, v4.8b, #1 // B1 |
| pmull v2.8h, v6.8b, v2.8b // E = A*B1 |
| ext v17.8b, v6.8b, v6.8b, #2 // A2 |
| pmull v17.8h, v17.8b, v4.8b // H = A2*B |
| ext v19.8b, v4.8b, v4.8b, #2 // B2 |
| pmull v19.8h, v6.8b, v19.8b // G = A*B2 |
| ext v18.8b, v6.8b, v6.8b, #3 // A3 |
| eor v16.16b, v16.16b, v2.16b // L = E + F |
| pmull v18.8h, v18.8b, v4.8b // J = A3*B |
| ext v2.8b, v4.8b, v4.8b, #3 // B3 |
| eor v17.16b, v17.16b, v19.16b // M = G + H |
| pmull v2.8h, v6.8b, v2.8b // I = A*B3 |
| |
| // Here we diverge from the 32-bit version. It computes the following |
| // (instructions reordered for clarity): |
| // |
| // veor $t0#lo, $t0#lo, $t0#hi @ t0 = P0 + P1 (L) |
| // vand $t0#hi, $t0#hi, $k48 |
| // veor $t0#lo, $t0#lo, $t0#hi |
| // |
| // veor $t1#lo, $t1#lo, $t1#hi @ t1 = P2 + P3 (M) |
| // vand $t1#hi, $t1#hi, $k32 |
| // veor $t1#lo, $t1#lo, $t1#hi |
| // |
| // veor $t2#lo, $t2#lo, $t2#hi @ t2 = P4 + P5 (N) |
| // vand $t2#hi, $t2#hi, $k16 |
| // veor $t2#lo, $t2#lo, $t2#hi |
| // |
| // veor $t3#lo, $t3#lo, $t3#hi @ t3 = P6 + P7 (K) |
| // vmov.i64 $t3#hi, #0 |
| // |
| // $kN is a mask with the bottom N bits set. AArch64 cannot compute on |
| // upper halves of SIMD registers, so we must split each half into |
| // separate registers. To compensate, we pair computations up and |
| // parallelize. |
| |
| ext v19.8b, v4.8b, v4.8b, #4 // B4 |
| eor v18.16b, v18.16b, v2.16b // N = I + J |
| pmull v19.8h, v6.8b, v19.8b // K = A*B4 |
| |
| // This can probably be scheduled more efficiently. For now, we just |
| // pair up independent instructions. |
| zip1 v20.2d, v16.2d, v17.2d |
| zip1 v22.2d, v18.2d, v19.2d |
| zip2 v21.2d, v16.2d, v17.2d |
| zip2 v23.2d, v18.2d, v19.2d |
| eor v20.16b, v20.16b, v21.16b |
| eor v22.16b, v22.16b, v23.16b |
| and v21.16b, v21.16b, v24.16b |
| and v23.16b, v23.16b, v25.16b |
| eor v20.16b, v20.16b, v21.16b |
| eor v22.16b, v22.16b, v23.16b |
| zip1 v16.2d, v20.2d, v21.2d |
| zip1 v18.2d, v22.2d, v23.2d |
| zip2 v17.2d, v20.2d, v21.2d |
| zip2 v19.2d, v22.2d, v23.2d |
| |
| ext v16.16b, v16.16b, v16.16b, #15 // t0 = t0 << 8 |
| ext v17.16b, v17.16b, v17.16b, #14 // t1 = t1 << 16 |
| pmull v2.8h, v6.8b, v4.8b // D = A*B |
| ext v19.16b, v19.16b, v19.16b, #12 // t3 = t3 << 32 |
| ext v18.16b, v18.16b, v18.16b, #13 // t2 = t2 << 24 |
| eor v16.16b, v16.16b, v17.16b |
| eor v18.16b, v18.16b, v19.16b |
| eor v2.16b, v2.16b, v16.16b |
| eor v2.16b, v2.16b, v18.16b |
| ext v16.16b, v0.16b, v2.16b, #8 |
| eor v1.16b, v1.16b, v0.16b // Karatsuba post-processing |
| eor v1.16b, v1.16b, v2.16b |
| eor v1.16b, v1.16b, v16.16b // Xm overlaps Xh.lo and Xl.hi |
| ins v0.d[1], v1.d[0] // Xh|Xl - 256-bit result |
| // This is a no-op due to the ins instruction below. |
| // ins v2.d[0], v1.d[1] |
| |
| // equivalent of reduction_avx from ghash-x86_64.pl |
| shl v17.2d, v0.2d, #57 // 1st phase |
| shl v18.2d, v0.2d, #62 |
| eor v18.16b, v18.16b, v17.16b // |
| shl v17.2d, v0.2d, #63 |
| eor v18.16b, v18.16b, v17.16b // |
| // Note Xm contains {Xl.d[1], Xh.d[0]}. |
| eor v18.16b, v18.16b, v1.16b |
| ins v0.d[1], v18.d[0] // Xl.d[1] ^= t2.d[0] |
| ins v2.d[0], v18.d[1] // Xh.d[0] ^= t2.d[1] |
| |
| ushr v18.2d, v0.2d, #1 // 2nd phase |
| eor v2.16b, v2.16b,v0.16b |
| eor v0.16b, v0.16b,v18.16b // |
| ushr v18.2d, v18.2d, #6 |
| ushr v0.2d, v0.2d, #1 // |
| eor v0.16b, v0.16b, v2.16b // |
| eor v0.16b, v0.16b, v18.16b // |
| |
| subs x3, x3, #16 |
| bne .Loop_neon |
| |
| rev64 v0.16b, v0.16b // byteswap Xi and write |
| ext v0.16b, v0.16b, v0.16b, #8 |
| st1 {v0.16b}, [x0] |
| |
| ret |
| .size gcm_ghash_neon,.-gcm_ghash_neon |
| |
| .section .rodata |
| .align 4 |
| .Lmasks: |
| .quad 0x0000ffffffffffff // k48 |
| .quad 0x00000000ffffffff // k32 |
| .quad 0x000000000000ffff // k16 |
| .quad 0x0000000000000000 // k0 |
| .byte 71,72,65,83,72,32,102,111,114,32,65,82,77,118,56,44,32,100,101,114,105,118,101,100,32,102,114,111,109,32,65,82,77,118,52,32,118,101,114,115,105,111,110,32,98,121,32,60,97,112,112,114,111,64,111,112,101,110,115,115,108,46,111,114,103,62,0 |
| .align 2 |
| .align 2 |
| #endif |
| #endif // !OPENSSL_NO_ASM |
| .section .note.GNU-stack,"",%progbits |
